Unreal Engine 5 Documentation has been moved to the Epic Developer Community

Unreal Engine 4.26

Unreal Engine 4.27

Unreal Engine 5.0

Unreal Engine 5.1

Unreal Engine 5.2

Unreal Engine 5.3

> Designing Visuals, Rendering, and Graphics > Niagara Visual Effects > Niagara System and Emitter Module Reference > Niagara Renderers

Light Theme

Dark Theme

Niagara Renderers

This document provides reference information for the Renderer group in a Niagara Emitter.

Choose your operating system:

Windows

macOS

Linux

On this page

Component Renderer
Light Renderer
Mesh Renderer
Ribbon Renderer
Sprite Renderer

Niagara Renderers describe how Unreal Engine should display each spawned particle. Note that this does not have to be visual. Unlike modules, the placement of the renderer in the stack is not necessarily relevant to draw order. Five types of renderers are currently supported:

Component Renderer
Light Renderer
Mesh Renderer
Ribbon Renderer
Sprite Renderer

The following sections list the parameters available in each type of renderer, along with a description of what that parameter does.

Component Renderer

Features are sometimes made available in an Experimental state so you can try them out, provide feedback, and see what we are planning. We do not recommend shipping projects with Experimental features. Please keep in mind that we do not guarantee backward compatibility for assets created at the experimental stage, the APIs for these features are subject to change, and we may remove entire Experimental features or specific functionality at our discretion.

The Component Renderer provides a way for you to spawn any type of component, and update its properties with data from the particle simulation.

The Component Type sets which component is used (for example, a Point Light) for the particle simulation and displays properties and settings relevant to it under the Component Properties category within the Details panel. The properties can be edited directly from this list, and all components spawned by the renderer will be constructed based on these properties.

To inject particle data into the components, use the dropdown menu to the right of a property and select the particle attribute to bind to this property (see the example below). Some component types require a special class as their parent. This means they will not work with the Component Render, but instead may be a subclass of SceneComponent. They can be either a C++ class or a Blueprint. An example of this is the Landscape Component, which needs a LandscapeProxy Actor as its parent.

This example uses a Point Light component. The properties displayed vary according to the component selected.

Because the configured bindings are evaluated and updated at the end of every tick after the particle simulation is finished, the Component Renderer can be an expensive operation to run. It should be used with caution.

Currently, only basic Niagara data types can be bound (float, bool, vector, and so on). Structs, objects, and enum properties can be set dynamically.

When using components in your Niagara systems, it's best to keep the component count as low as possible (unless you are working in an environment where performance is less of a concern, such as a cutscene rendered with Sequencer). Since each component has its own tick each frame in addition to the Niagara system, spawning a lot of effects with Component Renderers can impact performance.

In cases where a component does not expose properties, or the one you want to bind to is inside a nested struct, you can create a custom subclass of the component and add the property yourself. An example would be not being able to bind a value to the lighting channels of a Point Light component because they use a custom FLightingChannels struct.

However, you can subclass the Point Light component and add the channel properties yourself, then set the active light channels on the component's tick function, like the example below:

This enables you to then bind particle values to your properties in the Component Renderer.

The following properties are part of the Component Renderer before setting a Component Type .


Parameter	Description
Component Type	The scene component class to spawn with this renderer.
Component Count Limit	The maximum number of components that this emitter will spawn or update each frame.
Enabled Binding	Determines which attribute is used to check if component rendering should be enabled for a particle. This can be used to control the spawn-rate on a per-particle basis. If the binding does not exist, all particles spawn a component.
Assign Components on Particle ID	If true, then a component will not be automatically assigned to the first particle available, but will try to stick to one particle over its lifetime. Disabling this option is faster, but a particle can get a different component each tick, which can lead to problems with motion blur or flickering.
Only Create Components on Particle Spawn	If true, then new components can only be created on newly spawned particles. If a particle is not able to create a component on its first frame (for example, because the component limit was reached) then it will be blocked from spawning a component on subsequent frames.
Visualize Components	If true, then the editor visualization is enabled for the component; this has no effect in a shipped game. For example, the light component shows the active bounds in the editor viewport when this is enabled.

Light Renderer

The Niagara Light Renderer module has the following base parameters.


Parameter	Description
Light Rendering
Use Inverse Squared	This determines whether to use physically-based inverse squared falloff from the light. If this is unchecked, the value from the Light Exponent Binding Inverse Squared Falloff
Affects Translucence	This determines whether lights from this renderer affect translucency. Use with caution: if you enable this, create only a few particle lights; the larger and more numerous they are, the more it will cost.
Radius Scale	This factor is used to scale each particle light radius.
Color Add	This is a static color shift that is applied to each rendered light. You can set values for the X , Y , and Z axes. These axes correspond to the R , G , and B color values ( X=R, Y=G, Z=B ); they do not indicate position.
Sort Order
Sort Order Hint	By default, emitters are drawn in the order they are added to the stack in a Niagara system. The Sort Order Hint value allows you to control the draw order in a more detailed way. Materials of the same type will draw in order from lowest Sort Order value to highest within the system. The default value is 0 .
Bindings
Light Rendering Enabled Binding	This defines the attribute used to check whether or not light rendering should be enabled for a particle. By default, this uses the Particles.LightEnabled variable if it exists; otherwise it uses the default of None .
Light Exponent Binding	This defines the attribute used for the light's exponent when Inverse Squared Falloff is disabled. By default, this uses the variable Particles.LightExponent if it exists; otherwise it uses the default of 10 .
Position Binding	This defines the attribute used for positioning when generating lights. By default, this uses the Particles.Position variable if it exists; otherwise it uses the default Engine.Owner.Position variable. You can use any other attribute of a compatible type; however, the options available in the dropdown may or may not make sense to use for this binding.
Color Binding	This defines the attribute used for color when generating lights. By default, this uses the Particles.Color variable if it exists; otherwise it uses the default of R: 1, G: 1, B: 1, A: 1 .
Radius Binding	This defines the attribute used for light radius when generating light. By default, this uses the Particles.LightRadius variable if it exists; otherwise it uses the default of 100 . You can use any other attribute of a compatible type; however, the options available in the dropdown may or may not make sense to use for this binding.
Volumetric Scattering Binding	This defines the attribute used for the intensity of the volumetric scattering from this light. It scales the light's intensity and color. By default, this uses the Particles.LightVolumetricScattering variable if it exists; otherwise it uses the default of 1 .

Mesh Renderer

The Niagara Mesh Renderer has the following base parameters.


Parameter	Description
Mesh Rendering
Particle Mesh	This determines which Static Mesh will be instanced when rendering mesh particles. By default, the Static Mesh's Material is used. The Material must have the Niagara Mesh Particles flag checked.
Override Materials	When this is checked, it defines an array of Materials that are used instead of the Static Mesh's Material. All Override Materials must have the Niagara Mesh Particles flag checked. If the Particle Mesh requires more Materials than exist in this array, or if any entry in this array is set to None , the emitter uses the Particle Mesh's existing Material instead.
Facing Mode	This setting determines how the instanced Mesh orients itself relative to the camera. Default : This ignores the camera altogether. The mesh aligns its local-space X-axis with the particle's local-space X-axis, after transforming by the Particles.Transform vector (if it exists). Velocity : The mesh aligns its local-space X-axis with the particle's Particles.Velocity vector. Camera Position : The mesh local-space X-axis points toward the camera. Camera Plane : The mesh local-space X-axis points towards the closest point on the camera view plane.
Sorting
Sort Mode	This determines how particles are sorted prior to rendering. Choices are: None : There is no particle sorting. View Depth : This sorts by depth to the camera's near plane. View Distance : This sorts by the distance to the camera's origin. Custom Ascending : This sorts according to a per-particle attribute; lower values are rendered before higher values. Custom Descending : This sorts according to a per-particle attribute; higher values are rendered before lower values.
Sort Only When Translucent	If this is checked, particles are only sorted when using a translucent material.
Bindings
Position Binding	This defines the attribute used for positioning when generating instanced meshes. By default, this uses the Particles.Position variable if it exists; otherwise it uses the default Engine.Owner.Position variable. You can use any other attribute of a compatible type; however, the options available in the dropdown may or may not make sense to use for this binding.
Color Binding	This defines the attribute used for color when generating instanced meshes. By default, this uses the Particles.Color variable if it exists; otherwise it uses the default of R: 1, G: 1, B: 1, A: 1 .
Velocity Binding	This defines the attribute used for velocity when generating instanced meshes. By default, this uses the Particles.Velocity variable if it exists; otherwise it uses the default of X: 0, Y: 0, Z: 0 . You can use any other attribute of a compatible type; however, the options available in the dropdown may or may not make sense to use for this binding.
Mesh Orientation Binding	This defines the attribute used for orienting meshes when generating instanced meshes. By default, this uses the Particles.MeshOrientation variable if it exists; otherwise it uses the default of X: 0, Y: 0, Z: 0, W: 1 .
Scale Binding	This defines the attribute used for scale when generating instanced meshes. By default, this uses the Particles.Scale variable if it exists; otherwise it uses the default of X: 1, Y: 1, Z: 1 . You can use any other attribute of a compatible type; however, the options available in the dropdown may or may not make sense to use for this binding.
Dynamic Material Binding	This defines the attribute used for dynamic material parameters when generating instanced meshes. By default, this uses the Particles.DynamicMaterialParameter if it exists; otherwise it uses the default of X: 1, Y: 1, Z: 1, W: 1 .
Dynamic Material 1Binding	This defines the attribute used for dynamic material parameters when generating instanced meshes. By default, this uses the Particles.DynamicMaterialParameter1 if it exists; otherwise it uses the default of X: 1, Y: 1, Z: 1, W: 1 .
Dynamic Material 2Binding	This defines the attribute used for dynamic material parameters when generating instanced meshes. By default, this uses the Particles.DynamicMaterialParameter2 if it exists; otherwise it uses the default of X: 1, Y: 1, Z: 1, W: 1 .
Dynamic Material 3Binding	This defines the attribute used for dynamic material parameters when generating instanced meshes. By default, this uses the Particles.DynamicMaterialParameter3 if it exists; otherwise it uses the default of X: 1, Y: 1, Z: 1, W: 1 .
Material Random Binding	This defines the attribute used for material randoms when generating instanced meshes. By default, this uses the Particles.MaterialRandom variable if it exists; otherwise it uses the default of 0 . You can use any other attribute of a compatible type; however, the options available in the dropdown may or may not make sense to use for this binding.
Custom Sorting Binding	This defines the attribute used for custom sorting. By default, this uses the Particles.NormalizedAge variable if it exists; otherwise it uses the default of 0 . You can use any other attribute of a compatible type; however, the options available in the dropdown may or may not make sense to use for this binding.
Normalized Age Binding	This defines the attribute used for normalized age. By default, this uses the Particles.NormalizedAge variable if it exists; otherwise it uses the default of 0 . You can use any other attribute of a compatible type; however, the options available in the dropdown may or may not make sense to use for this binding.
Sort Order
Sort Order Hint	By default, emitters are drawn in the order they are added to the stack in a Niagara system. The Sort Order Hint value allows you to control the draw order in a more detailed way. Materials of the same type will draw in order from lowest Sort Order value to highest within the system. The default value is 0 .

Ribbon Renderer

The Niagara Ribbon Renderer has the following base parameters.


Parameter	Description
Ribbon Rendering
Material	Select the material used to render the ribbon.
Facing Mode	This setting determines how the ribbon orients itself relative to the camera. Screen : The ribbon faces the screen. Custom : This uses Particles.RibbonFacing as the facing vector. Custom Side Vector : Use Particles.RibbonFacing as the side vector, and calculate the facing vector from that. Using Ribbon Twist with this mode is not supported.
UV0 Tiling Distance	This setting tiles UV channel 0 based on the distance traversed by the ribbon. This disables the offsetting of UVs by age.
UV0 Scale	This setting defines the scale of UV channel 0 when you are using Tiling Distance .
UV0 Offset	This setting defines the offset used for UV channel 0 when you are using Tiling Distance .
UV0 Age Offset Mode	This setting defines the mode to use when offsetting UV channel 0 by age. This enables smooth texture movement when particles are added and removed at the end of the ribbon. This is not used when the Ribbon Link Order Binding is in use, or when Tiling Distance is in use.
UV1 Tiling Distance	This setting tiles UV channel 1 based on the distance traversed by the ribbon. This disables the offsetting of UVs by age.
UV1 Scale	This setting defines the scale of UV channel 1 when you are using Tiling Distance.
UV1 Offset	This setting defines the offset of UV channel 1 when you are using Tiling Distance.
UV1 Offset Mode	This setting defines the mode to use when offsetting UV channel 1 by age. This enables smooth texture movement when particles are added and removed at the end of the ribbon. This is not used when the Ribbon Link Order Binding is in use, or when Tiling Distance is in use.
Draw Direction	Draw Direction determines whether the ribbon is rendered Front to Back (from a point far from the camera to a point near the camera), or Back to Front (from a point near the camera to a point far from the camera). However this usually only makes a difference if the material is translucent and the ribbon folds on itself.
Tessellation
Curve Tension	This setting defines the curve tension, or how long the curve's tangents are. The setting's value ranges from 0 to 1 . The higher the value, the sharper the curve becomes.
Mode	This setting defines the tessellation mode allowing custom tessellation parameters, or disabling tessellation entirely. Automatic : This uses the default tessellation parameters. Custom : This allows customized tessellation parameters. Disabled : This disables tessellation.
Max Tessellation Factor	If the Mode is set to Custom , this defines the custom tessellation factor. Settings range from 1 to 16 . Larger values increase the amount of tessellation.
Use Constant Factor	If this is checked, the Max Tessellation Factor is used. Otherwise, the tessellation factor is adaptively selected based on the parameters below.
Tessellation Angle	This setting defines the angle (in degrees) at which the tessellation occurs. Settings range from 1 to 180 . Smaller values increase the amount of tessellation. If the setting is 0 , the Max Tessellation Factor is used.
Screen Space	If this is checked, use the ribbon's screen space percentage to adaptively adjust the tessellation factor.
Sort Order
Sort Order Hint	By default, emitters are drawn in the order they are added to the stack in a Niagara system. The Sort Order Hint value allows you to control the draw order in a more detailed way. Materials of the same type will draw in order from lowest Sort Order value to highest within the system. The default value is 0 .
Bindings
Position Binding	This defines the attribute used for positioning when generating ribbons. By default, this uses the Particles.Position variable if it exists; otherwise it uses the default Engine.Owner.Position variable. You can use any other attribute of a compatible type; however, the options available in the dropdown may or may not make sense to use for this binding.
Color Binding	This defines the attribute used for color when generating ribbons. By default, this uses the Particles.Color variable if it exists; otherwise it uses the default of R: 1, G: 1, B: 1, A: 1 .
Velocity Binding	This defines the attribute used for velocity when generating ribbons. By default, this uses the Particles.Velocity variable if it exists; otherwise it uses the default of X: 0, Y: 0, Z: 0 . You can use any other attribute of a compatible type; however, the options available in the dropdown may or may not make sense to use for this binding.
Normalized Age	This defines the attribute used for normalized age when generating ribbons. By default, this uses the Particles.NormalizedAge variable if it exists; otherwise it uses the default of 0 . You can use any other attribute of a compatible type; however, the options available in the dropdown may or may not make sense to use for this binding.
Ribbon Twist Binding	This defines the attribute used for ribbon twist when generating ribbons. By default, this uses the Particles.RibbonTwist variable if it exists; otherwise it uses the default of 0 . You can use any other attribute of a compatible type; however, the options available in the dropdown may or may not make sense to use for this binding.
Ribbon Width Binding	This defines the attribute used for ribbon width when generating ribbons. By default, this uses the Particles.RibbonWidth variable if it exists; otherwise it uses the default of 1 . You can use any other attribute of a compatible type; however, the options available in the dropdown may or may not make sense to use for this binding.
Ribbon Facing Binding	This defines the attribute used for ribbon facing when generating ribbons. By default, this uses the Particles.RibbonFacing variable if it exists; otherwise it uses the default of X: 0, Y: 0, Z: 1 . You can use any other attribute of a compatible type; however, the options available in the dropdown may or may not make sense to use for this binding.
Ribbon Id Binding	This defines the attribute used for ribbon ID when generating ribbons. Uses the Particles.RibbonID attribute if it exists, otherwise it uses the default Index: 0 AcquireTag: 0 .
Ribbon Link Order Binding	This defines the attribute used for ribbon link order when generating ribbons. By default, this uses the Particles.RibbonLinkOrder variable if it exists; otherwise it uses the default of 0 . You can use any other attribute of a compatible type; however, the options available in the dropdown may or may not make sense to use for this binding.
Material Random Binding	This defines the attribute used for material randoms when generating ribbons. By default, this uses the Particles.MaterialRandom variable if it exists; otherwise it uses the default of 0 . You can use any other attribute of a compatible type; however, the options available in the dropdown may or may not make sense to use for this binding.
Dynamic Material Binding	This defines the attribute used for dynamic material parameters when generating instanced ribbons. Use the Particles.DynamicMaterialParameter if it exists, otherwise use the default of X: 1, Y: 1, Z: 1, W: 1 .
Dynamic Material 1Binding	This defines the attribute used for dynamic material parameters when generating instanced ribbons. Use the Particles.DynamicMaterialParameter1 if it exists, otherwise use the default of X: 1, Y: 1, Z: 1, W: 1 .
Dynamic Material 2Binding	This defines the attribute used for dynamic material parameters when generating instanced ribbons. Use the Particles.DynamicMaterialParameter2 if it exists, otherwise use the default of X: 1, Y: 1, Z: 1, W: 1 .
Dynamic Material 3Binding	This defines the attribute used for dynamic material parameters when generating instanced ribbons. Use the Particles.DynamicMaterialParameter3 if it exists, otherwise use the default of X: 1, Y: 1, Z: 1, W: 1 .

Sprite Renderer

The Niagara Sprite Renderer has the following base parameters.


Parameter	Description
Sprite Rendering
Material	Select the material used to render the particle. The material selected must have the Use with Niagara Sprites flag checked.
Alignment	This setting defines how the particle alignment is affected by other parameters. For example, the Unaligned setting indicates that only Particle.SpriteRotation and FacingMode parameters affect the alignment of the particle.
Facing Mode	This setting defines how the sprite particle orients itself relative to the camera. For example, the Face Camera setting indicates that the particle's origin will always attempt to align its axes to the camera's axes.
Custom Facing Vector Mask	This is used as a per-axis interpolation factor, along with the CustomFacingVector mode, to determine how the sprite particle orients itself to the camera. You can set the X , Y , and Z axes separately. A setting of 1.0 means the sprite particle is fully facing the custom vector. A setting of 0.0 uses the standard facing strategy.
Pivot in UVSpace	This setting determines the location of the pivot point for this particle. It follows the Unreal Engine's UV space, which has the upper left of the image at 0,0 and the bottom right of the image at 1,1 with the halfway point being at 0.5,0.5 .
Remove HMD Roll	Check this box to remove the HMD view roll in VR.
Minimum Facing Camera Blend Distance	The distance at which the FacingCameraDistanceBlend is fully FacingCamera.
Maximum Facing Camera Blend Distance	The distance at which FacingCameraDistanceBlend is fully FacingCameraPosition.
Sorting
Sort Mode	This determines how particles are sorted prior to rendering. Choices are: None : There is no particle sorting. View Depth : This sorts by depth to the camera's near plane. View Distance : This sorts by the distance to the camera's origin. Custom Ascending : This sorts according to a per-particle attribute; lower values are rendered before higher values. Custom Descending : This sorts according to a per-particle attribute; higher values are rendered before lower values.
Sort Only When Translucent	If this is checked, particles are only sorted when you are using a translucent material.
Sub UV
Sub Image Size	When you use Subimage lookups for your particles, this setting provides the number of columns ( X ) and rows ( Y ).
Sub UV Blending Enabled	If this is checked, the Sub Image UV lookup is blended with its next adjacent member, using the fractional part of the SubImageIndex float value as the linear interpolation factor (lerp).
Bindings
Position Binding	This defines the attribute used for positioning when generating sprites. By default, this uses the Particles.Position variable if it exists; otherwise it uses the default variable Engine.Owner.Position . The dropdown shows other variables that have the same data type as Particles.Position ; however, those options probably do not make sense to use here.
Color Binding	This defines the attribute used for color when generating sprites. By default, this uses the Particles.Color variable if it exists; otherwise it uses the default of R: 1, G: 1, B: 1, A: 1 . You can use any other attribute of a compatible type instead if you want to customize the data being fed into this renderer.
Velocity Binding	This defines the attribute used for velocity when generating sprites. By default, this uses the Particle.Velocity variable if it exists; otherwise it uses the default of X: 0, Y: 0, Z: 0 . You can use any other attribute of a compatible type; however, the options available in the dropdown may or may not make sense to use for this binding.
Sprite Rotation Binding	This defines the attribute used for rotation (in degrees) when generating sprites. By default, this uses the Particles.SpriteRotation if it exists; otherwise it uses the default of 0. You can use any other attribute of a compatible type; however, the options available in the dropdown may or may not make sense to use for this binding.
Sprite Size Binding	This defines the attribute used for size when generating sprites. By default, this uses the Particle.SpriteSize variable if it exists; otherwise it uses the default of X: 50, Y: 50 . You can use any other attribute of a compatible type instead if you want to customize the data being fed into this renderer.
Sprite Facing Binding	This defines the attribute used for facing when generating sprites. By default, this uses the Particles.SpriteFacing variable if it exists; otherwise it uses the default of X: 1, Y: 0, Z: 0 . You can use any other attribute of a compatible type; however, the options available in the dropdown may or may not make sense to use for this binding.
Sprite Alignment Binding	This defines the attribute used for alignment when generating sprites. By default, this uses the Particles.SpriteAlignment variable if it exists; otherwise it uses the default of X: 1, Y: 0, Z: 0 . You can use any other attribute of a compatible type; however, the options available in the dropdown may or may not make sense to use for this binding.
Sub Image Index Binding	This defines the attribute used for sprite sub image indexing when generating sprites. By default, this uses the Particles.SubImageIndex variable if it exists; otherwise it uses the default of 0 . You can use any other attribute of a compatible type; however, the options available in the dropdown may or may not make sense to use for this binding.
Dynamic Material Binding	This defines the attribute used for dynamic material parameters when generating sprites. By default, this uses the Particles.DynamicMaterialParameter if it exists; otherwise it uses the default of X: 1, Y: 1, Z: 1, W: 1 .
Dynamic Material 1Binding	This defines the attribute used for dynamic material parameters when generating sprites. By default, this uses the Particles.DynamicMaterialParameter1 if it exists; otherwise it uses the default of X: 1, Y: 1, Z: 1, W: 1 .
Dynamic Material 2Binding	This defines the attribute used for dynamic material parameters when generating sprites. By default, this uses the Particles.DynamicMaterialParameter2 if it exists; otherwise it uses the default of X: 1, Y: 1, Z: 1, W: 1 .
Dynamic Material 3Binding	This defines the attribute used for dynamic material parameters when generating sprites. By default, this uses the Particles.DynamicMaterialParameter3 if it exists; otherwise it uses the default of X: 1, Y: 1, Z: 1, W: 1 .
Camera Offset Binding	This defines the attribute used for camera offset when generating sprites. By default, this uses the Particles.CameraOffset variable if it exists; otherwise it uses the default of 0 . You can select other compatible attributes from the dropdown menu.
UVScale Binding	This defines the attribute used for UV scale when generating sprites. By default, this uses the Particles.UVScale variable if it exists; otherwise it uses the default of X: 1, Y: 1 . You can select other compatible attributes from the dropdown menu.
Material Random Binding	This defines the attribute used for material randoms when generating sprites. By default, this uses Particles.MaterialRandom if it exists; otherwise it uses the default of 0 . You can select other compatible attributes from the dropdown menu.
Custom Sorting Binding	This defines the attribute used for custom sorting. By default, this uses the Particles.NormalizedAge variable if it exists; otherwise it uses the default of 0 . You can select other compatible attributes from the dropdown menu.
Normalized Age Binding	This defines the attribute used for custom sorting. By default, this uses the Particles.NormalizedAge variable if it exists; otherwise it uses the default of 0 . You can select other compatible attributes from the dropdown menu.
Cutout
Use Material Cutout Texture	If this is checked, use the cutout texture from the Material Opacity Mask; if none exist, use the cutout texture from Material Opacity.
Cutout Texture	Select the texture to create the bounding geometry from.
Bounding Mode	Set the number of bounding vertices. More bounding vertices results in reduced overdraw, but adds more triangle overhead. The eight vertex mode is best used when the Sub UV texture has a lot of space to cut out that is not captured by the four vertex mode, and when the particles using the texture will be few and large.
Opacity Source Mode	This setting has the following options: OSM Alpha OSM Color Brightness OSM Red Channel OSM Green Channel OSM Blue Channel
Alpha Threshold	Alpha channel values larger than the threshold are considered occupied and will be contained in the bounding geometry. Raising this threshold slightly can reduce overdraw in particles using this animation Asset.
Sort Order
Sort Order Hint	By default, emitters are drawn in the order they are added to the stack in a Niagara system. The Sort Order Hint value allows you to control the draw order in a more detailed way. Materials of the same type will draw in order from lowest Sort Order value to highest within the system. The default value is 0 .