`unreal.ModularSynthPreset`¶

class unreal.ModularSynthPreset(enable_polyphony=False, osc1_type=Synth1OscType.SAW, osc1_gain=1.0, osc1_octave=0.0, osc1_semitones=0.0, osc1_cents=0.0, osc1_pulse_width=0.5, osc2_type=Synth1OscType.SAW, osc2_gain=1.0, osc2_octave=0.0, osc2_semitones=0.0, osc2_cents=2.5, osc2_pulse_width=0.5, portamento=0.0, enable_unison=False, enable_oscillator_sync=False, spread=0.5, pan=0.0, lfo1_frequency=1.0, lfo1_gain=0.0, lfo1_type=SynthLFOType.SINE, lfo1_mode=SynthLFOMode.SYNC, lfo1_patch_type=SynthLFOPatchType.PATCH_TO_NONE, lfo2_frequency=1.0, lfo2_gain=0.0, lfo2_type=SynthLFOType.SINE, lfo2_mode=SynthLFOMode.SYNC, lfo2_patch_type=SynthLFOPatchType.PATCH_TO_NONE, gain_db=- 3.0, attack_time=10.0, decay_time=100.0, sustain_gain=0.707, release_time=5000.0, mod_env_patch_type=SynthModEnvPatch.PATCH_TO_NONE, mod_env_bias_patch_type=SynthModEnvBiasPatch.PATCH_TO_NONE, invert_modulation_envelope=False, invert_modulation_envelope_bias=False, modulation_envelope_depth=1.0, modulation_envelope_attack_time=10.0, modulation_envelope_decay_time=100.0, modulation_envelope_sustain_gain=0.707, modulation_envelope_release_time=5000.0, legato=True, retrigger=False, filter_frequency=8000.0, filter_q=2.0, filter_type=SynthFilterType.LOW_PASS, filter_algorithm=SynthFilterAlgorithm.LADDER, stereo_delay_enabled=True, stereo_delay_mode=SynthStereoDelayMode.PING_PONG, stereo_delay_time=700.0, stereo_delay_feedback=0.7, stereo_delay_wetlevel=0.3, stereo_delay_ratio=0.2, chorus_enabled=False, chorus_depth=0.2, chorus_feedback=0.5, chorus_frequency=2.0, patches=[])¶

Bases: unreal.TableRowBase

Modular Synth Preset

C++ Source:

Plugin: Synthesis
Module: Synthesis
File: EpicSynth1Component.h

Editor Properties: (see get_editor_property/set_editor_property)

attack_time (float): [Read-Write] Attack Time: The amplitude envelope attack time (in ms) [0.0, 10000]
chorus_depth (float): [Read-Write] Chorus Depth: The depth of the chorus effect [0.0, 1.0]
chorus_enabled (bool): [Read-Write] Chorus Enabled: Whether or not the chorus effect is enabled
chorus_feedback (float): [Read-Write] Chorus Feedback: The amount of feedback in the chorus effect [0.0, 1.0]
chorus_frequency (float): [Read-Write] Chorus Frequency: The chorus LFO frequency [0.0, 20.0]
decay_time (float): [Read-Write] Decay Time: The amplitude envelope decay time (in ms)[0.0, 10000]
enable_oscillator_sync (bool): [Read-Write] Enable Oscillator Sync: Whether or not oscillator sync is enabled. Oscillator sync forces oscillator 2’s phase to align with oscillator 1’s phase.
enable_polyphony (bool): [Read-Write] Enable Polyphony: Whether or not to allow multiple synth voices.
enable_unison (bool): [Read-Write] Enable Unison: Enables forcing the oscillators to have no stereo spread.
filter_algorithm (SynthFilterAlgorithm): [Read-Write] Filter Algorithm: The output filter circuit/algorithm type (one-pole ladder, ladder, state-variable)
filter_frequency (float): [Read-Write] Filter Frequency: The output filter cutoff frequency (hz) [0.0, 20000.0]
filter_q (float): [Read-Write] Filter Q: The output filter resonance (Q) [0.5, 10]
filter_type (SynthFilterType): [Read-Write] Filter Type: The output filter type (lowpass, highpass, bandpass, bandstop)
gain_db (float): [Read-Write] Gain Db: The overall gain to use for the synthesizer in dB [-90.0, 20.0]
invert_modulation_envelope (bool): [Read-Write] Invert Modulation Envelope: Whether or not to invert the modulation envelope
invert_modulation_envelope_bias (bool): [Read-Write] Invert Modulation Envelope Bias: Whether or not to invert the modulation envelope bias output
legato (bool): [Read-Write] Legato: Whether or not to use legato mode.
lfo1_frequency (float): [Read-Write] LFO1Frequency: The frequency to use for LFO 1 (in hz) [0.0, 50.0]
lfo1_gain (float): [Read-Write] LFO1Gain: The linear gain to use for LFO 1 [0.0, 1.0]
lfo1_mode (SynthLFOMode): [Read-Write] LFO1Mode: The mode to use for LFO 1
lfo1_patch_type (SynthLFOPatchType): [Read-Write] LFO1Patch Type: The built-in patch type to use for LFO 1 (you can route this to any patchable parameter using the Patches parameter)
lfo1_type (SynthLFOType): [Read-Write] LFO1Type: The type of LFO to use for LFO 1
lfo2_frequency (float): [Read-Write] LFO2Frequency: The frequency to use for LFO 2 (in hz) [0.0, 50.0]
lfo2_gain (float): [Read-Write] LFO2Gain: The linear gain to use for LFO 2 [0.0, 1.0]
lfo2_mode (SynthLFOMode): [Read-Write] LFO2Mode: The mode to use for LFO 2
lfo2_patch_type (SynthLFOPatchType): [Read-Write] LFO2Patch Type: The built-in patch type to use for LFO 2 (you can route this to any patchable parameter using the Patches parameter)
lfo2_type (SynthLFOType): [Read-Write] LFO2Type: The type of LFO to use for LFO 2
mod_env_bias_patch_type (SynthModEnvBiasPatch): [Read-Write] Mod Env Bias Patch Type: The built-in patch type for the envelope modulator bias output. Bias is when the envelope output is offset by the sustain gain.
mod_env_patch_type (SynthModEnvPatch): [Read-Write] Mod Env Patch Type: The built-in patch type for the envelope modulator
modulation_envelope_attack_time (float): [Read-Write] Modulation Envelope Attack Time: The modulation envelope attack time (in ms) [0.0, 10000]
modulation_envelope_decay_time (float): [Read-Write] Modulation Envelope Decay Time: The modulation envelope decay time (in ms) [0.0, 10000]
modulation_envelope_depth (float): [Read-Write] Modulation Envelope Depth: The “depth” (i.e. how much) modulation envelope to use. This scales the modulation envelope output. [0.0, 1.0]
modulation_envelope_release_time (float): [Read-Write] Modulation Envelope Release Time: The modulation envelope release time (in ms) [0.0, 10000]
modulation_envelope_sustain_gain (float): [Read-Write] Modulation Envelope Sustain Gain: The modulation envelope sustain gain (linear gain) [0.0, 1.0]
osc1_cents (float): [Read-Write] Osc 1Cents: The cents (hundreds of a semitone) of oscillator 1. [-100.0, 100.0]
osc1_gain (float): [Read-Write] Osc 1Gain: The linear gain of oscillator 1 [0.0, 1.0]
osc1_octave (float): [Read-Write] Osc 1Octave: The octave of oscillator 1. [-8.0, 8.0]
osc1_pulse_width (float): [Read-Write] Osc 1Pulse Width: The pulsewidth of oscillator 1 (when using a square wave type oscillator). [0.0, 1.0]
osc1_semitones (float): [Read-Write] Osc 1Semitones: The semi-tones of oscillator 1. [-12.0, 12.0]
osc1_type (Synth1OscType): [Read-Write] Osc 1Type: What type of oscillator to use for oscillator 1
osc2_cents (float): [Read-Write] Osc 2Cents: The cents (hundreds of a semitone) of oscillator 2. [-100.0, 100.0]
osc2_gain (float): [Read-Write] Osc 2Gain: The linear gain of oscillator 2 [0.0, 1.0]
osc2_octave (float): [Read-Write] Osc 2Octave: The octave of oscillator 2. [-8.0, 8.0]
osc2_pulse_width (float): [Read-Write] Osc 2Pulse Width: The pulsewidth of oscillator 2 (when using a square wave type oscillator). [0.0, 1.0]
osc2_semitones (float): [Read-Write] Osc 2Semitones: The semi-tones of oscillator 2. [-12.0, 12.0]
osc2_type (Synth1OscType): [Read-Write] Osc 2Type: What type of oscillator to use for oscillator 2
pan (float): [Read-Write] Pan: The stereo pan to use. 0.0 is center. -1.0 is left, 1.0 is right.
patches (Array(EpicSynth1Patch)): [Read-Write] Patches: The modular synth patch cords to use for the synth. Allows routing the LFO1/LFO2 and Modulation Envelope to any patchable destination.
portamento (float): [Read-Write] Portamento: The amount of portamento to use, which is the amount of pitch sliding from current note to next [0.0, 1.0]
release_time (float): [Read-Write] Release Time: The amplitude envelope release time (in ms) [0.0, 10000]
retrigger (bool): [Read-Write] Retrigger: Whether or not to use retrigger mode.
spread (float): [Read-Write] Spread: The amount of stereo spread to use between oscillator 1 and oscillator 2 [0.0, 1.0]
stereo_delay_enabled (bool): [Read-Write] Stereo Delay Enabled: Whether or not stereo delay is enabled on the synth
stereo_delay_feedback (float): [Read-Write] Stereo Delay Feedback: The amount of feedback in the stereo delay line [0.0, 1.0]
stereo_delay_mode (SynthStereoDelayMode): [Read-Write] Stereo Delay Mode: The stereo delay mode of the synth
stereo_delay_ratio (float): [Read-Write] Stereo Delay Ratio: The ratio between left and right stereo delay lines (wider value is more separation) [0.0, 1.0]
stereo_delay_time (float): [Read-Write] Stereo Delay Time: The stereo delay time (in ms) [0.0, 2000.0]
stereo_delay_wetlevel (float): [Read-Write] Stereo Delay Wetlevel: The output wet level to use for the stereo delay time [0.0, 1.0]
sustain_gain (float): [Read-Write] Sustain Gain: The amplitude envelope sustain amount (linear gain) [0.0, 1.0]

property attack_time¶

[Read-Write] Attack Time: The amplitude envelope attack time (in ms) [0.0, 10000]

Type: (float)

property chorus_depth¶

[Read-Write] Chorus Depth: The depth of the chorus effect [0.0, 1.0]

Type: (float)

property chorus_enabled¶

[Read-Write] Chorus Enabled: Whether or not the chorus effect is enabled

Type: (bool)

property chorus_feedback¶

[Read-Write] Chorus Feedback: The amount of feedback in the chorus effect [0.0, 1.0]

Type: (float)

property chorus_frequency¶

[Read-Write] Chorus Frequency: The chorus LFO frequency [0.0, 20.0]

Type: (float)

property decay_time¶

[Read-Write] Decay Time: The amplitude envelope decay time (in ms)[0.0, 10000]

Type: (float)

property enable_oscillator_sync¶

[Read-Write] Enable Oscillator Sync: Whether or not oscillator sync is enabled. Oscillator sync forces oscillator 2’s phase to align with oscillator 1’s phase.

Type: (bool)

property enable_polyphony¶

[Read-Write] Enable Polyphony: Whether or not to allow multiple synth voices.

Type: (bool)

property enable_unison¶

[Read-Write] Enable Unison: Enables forcing the oscillators to have no stereo spread.

Type: (bool)

property filter_algorithm¶

[Read-Write] Filter Algorithm: The output filter circuit/algorithm type (one-pole ladder, ladder, state-variable)

Type: (SynthFilterAlgorithm)

property filter_frequency¶

[Read-Write] Filter Frequency: The output filter cutoff frequency (hz) [0.0, 20000.0]

Type: (float)

property filter_q¶

[Read-Write] Filter Q: The output filter resonance (Q) [0.5, 10]

Type: (float)

property filter_type¶

[Read-Write] Filter Type: The output filter type (lowpass, highpass, bandpass, bandstop)

Type: (SynthFilterType)

property gain_db¶

[Read-Write] Gain Db: The overall gain to use for the synthesizer in dB [-90.0, 20.0]

Type: (float)

property invert_modulation_envelope¶

[Read-Write] Invert Modulation Envelope: Whether or not to invert the modulation envelope

Type: (bool)

property invert_modulation_envelope_bias¶

[Read-Write] Invert Modulation Envelope Bias: Whether or not to invert the modulation envelope bias output

Type: (bool)

property legato¶

[Read-Write] Legato: Whether or not to use legato mode.

Type: (bool)

property lfo1_frequency¶

[Read-Write] LFO1Frequency: The frequency to use for LFO 1 (in hz) [0.0, 50.0]

Type: (float)

property lfo1_gain¶

[Read-Write] LFO1Gain: The linear gain to use for LFO 1 [0.0, 1.0]

Type: (float)

property lfo1_mode¶

[Read-Write] LFO1Mode: The mode to use for LFO 1

Type: (SynthLFOMode)

property lfo1_patch_type¶

[Read-Write] LFO1Patch Type: The built-in patch type to use for LFO 1 (you can route this to any patchable parameter using the Patches parameter)

Type: (SynthLFOPatchType)

property lfo1_type¶

[Read-Write] LFO1Type: The type of LFO to use for LFO 1

Type: (SynthLFOType)

property lfo2_frequency¶

[Read-Write] LFO2Frequency: The frequency to use for LFO 2 (in hz) [0.0, 50.0]

Type: (float)

property lfo2_gain¶

[Read-Write] LFO2Gain: The linear gain to use for LFO 2 [0.0, 1.0]

Type: (float)

property lfo2_mode¶

[Read-Write] LFO2Mode: The mode to use for LFO 2

Type: (SynthLFOMode)

property lfo2_patch_type¶

[Read-Write] LFO2Patch Type: The built-in patch type to use for LFO 2 (you can route this to any patchable parameter using the Patches parameter)

Type: (SynthLFOPatchType)

property lfo2_type¶

[Read-Write] LFO2Type: The type of LFO to use for LFO 2

Type: (SynthLFOType)

property mod_env_bias_patch_type¶

[Read-Write] Mod Env Bias Patch Type: The built-in patch type for the envelope modulator bias output. Bias is when the envelope output is offset by the sustain gain.

Type: (SynthModEnvBiasPatch)

property mod_env_patch_type¶

[Read-Write] Mod Env Patch Type: The built-in patch type for the envelope modulator

Type: (SynthModEnvPatch)

property modulation_envelope_attack_time¶

[Read-Write] Modulation Envelope Attack Time: The modulation envelope attack time (in ms) [0.0, 10000]

Type: (float)

property modulation_envelope_decay_time¶

[Read-Write] Modulation Envelope Decay Time: The modulation envelope decay time (in ms) [0.0, 10000]

Type: (float)

property modulation_envelope_depth¶

[Read-Write] Modulation Envelope Depth: The “depth” (i.e. how much) modulation envelope to use. This scales the modulation envelope output. [0.0, 1.0]

Type: (float)

property modulation_envelope_release_time¶

[Read-Write] Modulation Envelope Release Time: The modulation envelope release time (in ms) [0.0, 10000]

Type: (float)

property modulation_envelope_sustain_gain¶

[Read-Write] Modulation Envelope Sustain Gain: The modulation envelope sustain gain (linear gain) [0.0, 1.0]

Type: (float)

property osc1_cents¶

[Read-Write] Osc 1Cents: The cents (hundreds of a semitone) of oscillator 1. [-100.0, 100.0]

Type: (float)

property osc1_gain¶

[Read-Write] Osc 1Gain: The linear gain of oscillator 1 [0.0, 1.0]

Type: (float)

property osc1_octave¶

[Read-Write] Osc 1Octave: The octave of oscillator 1. [-8.0, 8.0]

Type: (float)

property osc1_pulse_width¶

[Read-Write] Osc 1Pulse Width: The pulsewidth of oscillator 1 (when using a square wave type oscillator). [0.0, 1.0]

Type: (float)

property osc1_semitones¶

[Read-Write] Osc 1Semitones: The semi-tones of oscillator 1. [-12.0, 12.0]

Type: (float)

property osc1_type¶

[Read-Write] Osc 1Type: What type of oscillator to use for oscillator 1

Type: (Synth1OscType)

property osc2_cents¶

[Read-Write] Osc 2Cents: The cents (hundreds of a semitone) of oscillator 2. [-100.0, 100.0]

Type: (float)

property osc2_gain¶

[Read-Write] Osc 2Gain: The linear gain of oscillator 2 [0.0, 1.0]

Type: (float)

property osc2_octave¶

[Read-Write] Osc 2Octave: The octave of oscillator 2. [-8.0, 8.0]

Type: (float)

property osc2_pulse_width¶

[Read-Write] Osc 2Pulse Width: The pulsewidth of oscillator 2 (when using a square wave type oscillator). [0.0, 1.0]

Type: (float)

property osc2_semitones¶

[Read-Write] Osc 2Semitones: The semi-tones of oscillator 2. [-12.0, 12.0]

Type: (float)

property osc2_type¶

[Read-Write] Osc 2Type: What type of oscillator to use for oscillator 2

Type: (Synth1OscType)

property pan¶

[Read-Write] Pan: The stereo pan to use. 0.0 is center. -1.0 is left, 1.0 is right.

Type: (float)

property patches¶

[Read-Write] Patches: The modular synth patch cords to use for the synth. Allows routing the LFO1/LFO2 and Modulation Envelope to any patchable destination.

Type: (Array(EpicSynth1Patch))

property portamento¶

[Read-Write] Portamento: The amount of portamento to use, which is the amount of pitch sliding from current note to next [0.0, 1.0]

Type: (float)

property release_time¶

[Read-Write] Release Time: The amplitude envelope release time (in ms) [0.0, 10000]

Type: (float)

property retrigger¶

[Read-Write] Retrigger: Whether or not to use retrigger mode.

Type: (bool)

property spread¶

[Read-Write] Spread: The amount of stereo spread to use between oscillator 1 and oscillator 2 [0.0, 1.0]

Type: (float)

property stereo_delay_enabled¶

[Read-Write] Stereo Delay Enabled: Whether or not stereo delay is enabled on the synth

Type: (bool)

property stereo_delay_feedback¶

[Read-Write] Stereo Delay Feedback: The amount of feedback in the stereo delay line [0.0, 1.0]

Type: (float)

property stereo_delay_mode¶

[Read-Write] Stereo Delay Mode: The stereo delay mode of the synth

Type: (SynthStereoDelayMode)

property stereo_delay_ratio¶

[Read-Write] Stereo Delay Ratio: The ratio between left and right stereo delay lines (wider value is more separation) [0.0, 1.0]

Type: (float)

property stereo_delay_time¶

[Read-Write] Stereo Delay Time: The stereo delay time (in ms) [0.0, 2000.0]

Type: (float)

property stereo_delay_wetlevel¶

[Read-Write] Stereo Delay Wetlevel: The output wet level to use for the stereo delay time [0.0, 1.0]

Type: (float)

property sustain_gain¶

[Read-Write] Sustain Gain: The amplitude envelope sustain amount (linear gain) [0.0, 1.0]

Type: (float)

`unreal.ModularSynthPreset`¶

Previous topic

Next topic

unreal.ModularSynthPreset¶

`unreal.ModularSynthPreset`¶