unreal.Pawn

class unreal.Pawn(outer=None, name='None')

Bases: unreal.Actor

Pawn is the base class of all actors that can be possessed by players or AI. They are the physical representations of players and creatures in a level. see: https://docs.unrealengine.com/latest/INT/Gameplay/Framework/Pawn/

C++ Source:

  • Module: Engine

  • File: Pawn.h

Editor Properties: (see get_editor_property/set_editor_property)

  • actor_guid (Guid): [Read-Write] Actor Guid: The GUID for this actor.

    Note: Don’t use VisibleAnywhere here to avoid getting the CPF_Edit flag and get this property reset when resetting to defaults.

    See FActorDetails::AddActorCategory and EditorUtilities::CopySingleProperty for details.

  • ai_controller_class (type(Class)): [Read-Write] AIController Class: Default class to use when pawn is controlled by AI.

  • allow_tick_before_begin_play (bool): [Read-Write] Allow Tick Before Begin Play: Whether we allow this Actor to tick before it receives the BeginPlay event. Normally we don’t tick actors until after BeginPlay; this setting allows this behavior to be overridden. This Actor must be able to tick for this setting to be relevant.

  • always_relevant (bool): [Read-Write] Always Relevant: Always relevant for network (overrides bOnlyRelevantToOwner).

  • auto_destroy_when_finished (bool): [Read-Write] Auto Destroy when Finished: If true then destroy self when “finished”, meaning all relevant components report that they are done and no timelines or timers are in flight.

  • auto_possess_ai (AutoPossessAI): [Read-Write] Auto Possess AI: Determines when the Pawn creates and is possessed by an AI Controller (on level start, when spawned, etc). Only possible if AIControllerClassRef is set, and ignored if AutoPossessPlayer is enabled. see: AutoPossessPlayer

  • auto_possess_player (AutoReceiveInput): [Read-Write] Auto Possess Player: Determines which PlayerController, if any, should automatically possess the pawn when the level starts or when the pawn is spawned. see: AutoPossessAI

  • auto_receive_input (AutoReceiveInput): [Read-Write] Auto Receive Input: Automatically registers this actor to receive input from a player.

  • base_eye_height (float): [Read-Write] Base Eye Height: Base eye height above collision center.

  • block_input (bool): [Read-Write] Block Input: If true, all input on the stack below this actor will not be considered

  • call_pre_replication (bool): [Read-Write] Call Pre Replication

  • call_pre_replication_for_replay (bool): [Read-Write] Call Pre Replication for Replay

  • can_affect_navigation_generation (bool): [Read-Write] Can Affect Navigation Generation: If set to false (default) given pawn instance will never affect navigation generation (but components could). Setting it to true will result in using regular AActor’s navigation relevancy calculation to check if this pawn instance should affect navigation generation. note: Use SetCanAffectNavigationGeneration() to change this value at runtime. note: Modifying this value at runtime will result in any navigation change only if runtime navigation generation is enabled. note: Override UpdateNavigationRelevance() to propagate the flag to the desired components. see: SetCanAffectNavigationGeneration(), UpdateNavigationRelevance()

  • can_be_damaged (bool): [Read-Write] Can be Damaged: Whether this actor can take damage. Must be true for damage events (e.g. ReceiveDamage()) to be called. see: https://www.unrealengine.com/blog/damage-in-ue4 see: TakeDamage(), ReceiveDamage()

  • can_be_in_cluster (bool): [Read-Write] Can be in Cluster: If true, this actor can be put inside of a GC Cluster to improve Garbage Collection performance

  • custom_time_dilation (float): [Read-Write] Custom Time Dilation: Allow each actor to run at a different time speed. The DeltaTime for a frame is multiplied by the global TimeDilation (in WorldSettings) and this CustomTimeDilation for this actor’s tick.

  • data_layers (Array(ActorDataLayer)): [Read-Write] Data Layers: DataLayers the actor belongs to.

  • default_update_overlaps_method_during_level_streaming (ActorUpdateOverlapsMethod): [Read-Only] Default Update Overlaps Method During Level Streaming: Default value taken from config file for this class when ‘UseConfigDefault’ is chosen for ‘UpdateOverlapsMethodDuringLevelStreaming’. This allows a default to be chosen per class in the matching config. For example, for Actor it could be specified in DefaultEngine.ini as:

    [/Script/Engine.Actor] DefaultUpdateOverlapsMethodDuringLevelStreaming = OnlyUpdateMovable

    Another subclass could set their default to something different, such as:

    [/Script/Engine.BlockingVolume] DefaultUpdateOverlapsMethodDuringLevelStreaming = NeverUpdate see: UpdateOverlapsMethodDuringLevelStreaming

  • enable_auto_lod_generation (bool): [Read-Write] Enable Auto LODGeneration: Whether this actor should be considered or not during HLOD generation.

  • find_camera_component_when_view_target (bool): [Read-Write] Find Camera Component when View Target: If true, this actor should search for an owned camera component to view through when used as a view target.

  • generate_overlap_events_during_level_streaming (bool): [Read-Write] Generate Overlap Events During Level Streaming: If true, this actor will generate overlap Begin/End events when spawned as part of level streaming, which includes initial level load. You might enable this is in the case where a streaming level loads around an actor and you want Begin/End overlap events to trigger. see: UpdateOverlapsMethodDuringLevelStreaming

  • hidden (bool): [Read-Write] Hidden: Allows us to only see this Actor in the Editor, and not in the actual game. see: SetActorHiddenInGame()

  • hlod_layer (HLODLayer): [Read-Write] HLODLayer: The UHLODLayer in which this actor should be included.

  • ignores_origin_shifting (bool): [Read-Write] Ignores Origin Shifting: Whether this actor should not be affected by world origin shifting.

  • initial_life_span (float): [Read-Write] Initial Life Span: How long this Actor lives before dying, 0=forever. Note this is the INITIAL value and should not be modified once play has begun.

  • input_priority (int32): [Read-Write] Input Priority: The priority of this input component when pushed in to the stack.

  • instigator (Pawn): [Read-Write] Instigator: Pawn responsible for damage and other gameplay events caused by this actor.

  • is_editor_only_actor (bool): [Read-Write] Is Editor Only Actor: Whether this actor is editor-only. Use with care, as if this actor is referenced by anything else that reference will be NULL in cooked builds

  • is_spatially_loaded (bool): [Read-Write] Is Spatially Loaded: Determine if this actor is spatially loaded when placed in a partitioned world.

    If true, this actor will be loaded when in the range of any streaming sources and if (1) in no data layers, or (2) one or more of its data layers are enabled. If false, this actor will be loaded if (1) in no data layers, or (2) one or more of its data layers are enabled.

  • last_hit_by (Controller): [Read-Write] Last Hit By: Controller of the last Actor that caused us damage.

  • layers (Array(Name)): [Read-Write] Layers: Layers the actor belongs to. This is outside of the editoronly data to allow hiding of LD-specified layers at runtime for profiling.

  • min_net_update_frequency (float): [Read-Write] Min Net Update Frequency: Used to determine what rate to throttle down to when replicated properties are changing infrequently

  • net_cull_distance_squared (float): [Read-Write] Net Cull Distance Squared: Square of the max distance from the client’s viewpoint that this actor is relevant and will be replicated.

  • net_dormancy (NetDormancy): [Read-Write] Net Dormancy: Dormancy setting for actor to take itself off of the replication list without being destroyed on clients.

  • net_load_on_client (bool): [Read-Write] Net Load on Client: This actor will be loaded on network clients during map load

  • net_priority (float): [Read-Write] Net Priority: Priority for this actor when checking for replication in a low bandwidth or saturated situation, higher priority means it is more likely to replicate

  • net_update_frequency (float): [Read-Write] Net Update Frequency: How often (per second) this actor will be considered for replication, used to determine NetUpdateTime

  • net_use_owner_relevancy (bool): [Read-Write] Net Use Owner Relevancy: If actor has valid Owner, call Owner’s IsNetRelevantFor and GetNetPriority

  • on_actor_begin_overlap (ActorBeginOverlapSignature): [Read-Write] On Actor Begin Overlap: Called when another actor begins to overlap this actor, for example a player walking into a trigger. For events when objects have a blocking collision, for example a player hitting a wall, see ‘Hit’ events. note: Components on both this and the other Actor must have bGenerateOverlapEvents set to true to generate overlap events.

  • on_actor_end_overlap (ActorEndOverlapSignature): [Read-Write] On Actor End Overlap: Called when another actor stops overlapping this actor. note: Components on both this and the other Actor must have bGenerateOverlapEvents set to true to generate overlap events.

  • on_actor_hit (ActorHitSignature): [Read-Write] On Actor Hit: Called when this Actor hits (or is hit by) something solid. This could happen due to things like Character movement, using Set Location with ‘sweep’ enabled, or physics simulation. For events when objects overlap (e.g. walking into a trigger) see the ‘Overlap’ event. note: For collisions during physics simulation to generate hit events, ‘Simulation Generates Hit Events’ must be enabled.

  • on_begin_cursor_over (ActorBeginCursorOverSignature): [Read-Write] On Begin Cursor Over: Called when the mouse cursor is moved over this actor if mouse over events are enabled in the player controller.

  • on_clicked (ActorOnClickedSignature): [Read-Write] On Clicked: Called when the left mouse button is clicked while the mouse is over this actor and click events are enabled in the player controller.

  • on_destroyed (ActorDestroyedSignature): [Read-Write] On Destroyed: Event triggered when the actor has been explicitly destroyed.

  • on_end_cursor_over (ActorEndCursorOverSignature): [Read-Write] On End Cursor Over: Called when the mouse cursor is moved off this actor if mouse over events are enabled in the player controller.

  • on_end_play (ActorEndPlaySignature): [Read-Write] On End Play: Event triggered when the actor is being deleted or removed from a level.

  • on_input_touch_begin (ActorOnInputTouchBeginSignature): [Read-Write] On Input Touch Begin: Called when a touch input is received over this actor when touch events are enabled in the player controller.

  • on_input_touch_end (ActorOnInputTouchEndSignature): [Read-Write] On Input Touch End: Called when a touch input is received over this component when touch events are enabled in the player controller.

  • on_input_touch_enter (ActorBeginTouchOverSignature): [Read-Write] On Input Touch Enter: Called when a finger is moved over this actor when touch over events are enabled in the player controller.

  • on_input_touch_leave (ActorEndTouchOverSignature): [Read-Write] On Input Touch Leave: Called when a finger is moved off this actor when touch over events are enabled in the player controller.

  • on_released (ActorOnReleasedSignature): [Read-Write] On Released: Called when the left mouse button is released while the mouse is over this actor and click events are enabled in the player controller.

  • on_take_any_damage (TakeAnyDamageSignature): [Read-Write] On Take Any Damage: Called when the actor is damaged in any way.

  • on_take_point_damage (TakePointDamageSignature): [Read-Write] On Take Point Damage: Called when the actor is damaged by point damage.

  • on_take_radial_damage (TakeRadialDamageSignature): [Read-Write] On Take Radial Damage: Called when the actor is damaged by radial damage.

  • only_relevant_to_owner (bool): [Read-Write] Only Relevant to Owner: If true, this actor is only relevant to its owner. If this flag is changed during play, all non-owner channels would need to be explicitly closed.

  • optimize_bp_component_data (bool): [Read-Write] Optimize BPComponent Data: Whether to cook additional data to speed up spawn events at runtime for any Blueprint classes based on this Actor. This option may slightly increase memory usage in a cooked build.

  • pivot_offset (Vector): [Read-Write] Pivot Offset: Local space pivot offset for the actor, only used in the editor

  • player_state (PlayerState): [Read-Write] Player State: If Pawn is possessed by a player, points to its Player State. Needed for network play as controllers are not replicated to clients.

  • primary_actor_tick (ActorTickFunction): [Read-Write] Primary Actor Tick: Primary Actor tick function, which calls TickActor(). Tick functions can be configured to control whether ticking is enabled, at what time during a frame the update occurs, and to set up tick dependencies. see: https://docs.unrealengine.com/API/Runtime/Engine/Engine/FTickFunction see: AddTickPrerequisiteActor(), AddTickPrerequisiteComponent()

  • receive_controller_changed_delegate (PawnControllerChangedSignature): [Read-Write] Receive Controller Changed Delegate: Event called after a pawn’s controller has changed, on the server and owning client. This will happen at the same time as the delegate on GameInstance

  • receive_restarted_delegate (PawnRestartedSignature): [Read-Write] Receive Restarted Delegate: Event called after a pawn has been restarted, usually by a possession change. This is called on the server for all pawns and the owning client for player pawns

  • relevant_for_level_bounds (bool): [Read-Write] Relevant for Level Bounds: If true, this actor’s component’s bounds will be included in the level’s bounding box unless the Actor’s class has overridden IsLevelBoundsRelevant

  • replay_rewindable (bool): [Read-Write] Replay Rewindable: If true, this actor will only be destroyed during scrubbing if the replay is set to a time before the actor existed. Otherwise, RewindForReplay will be called if we detect the actor needs to be reset. Note, this Actor must not be destroyed by gamecode, and RollbackViaDeletion may not be used.

  • replicate_movement (bool): [Read-Write] Replicate Movement: If true, replicate movement/location related properties. Actor must also be set to replicate. see: SetReplicates() see: https://docs.unrealengine.com/InteractiveExperiences/Networking/Actors

  • replicated_movement (RepMovement): [Read-Write] Replicated Movement: Used for replication of our RootComponent’s position and velocity

  • replicates (bool): [Read-Write] Replicates: If true, this actor will replicate to remote machines see: SetReplicates()

  • root_component (SceneComponent): [Read-Write] Root Component: The component that defines the transform (location, rotation, scale) of this Actor in the world, all other components must be attached to this one somehow

  • runtime_grid (Name): [Read-Write] Runtime Grid: Determine in which partition grid this actor will be placed in the partition (if the world is partitioned). If None, the decision will be left to the partition.

  • spawn_collision_handling_method (SpawnActorCollisionHandlingMethod): [Read-Write] Spawn Collision Handling Method: Controls how to handle spawning this actor in a situation where it’s colliding with something else. “Default” means AlwaysSpawn here.

  • sprite_scale (float): [Read-Write] Sprite Scale: The scale to apply to any billboard components in editor builds (happens in any WITH_EDITOR build, including non-cooked games).

  • tags (Array(Name)): [Read-Write] Tags: Array of tags that can be used for grouping and categorizing.

  • update_overlaps_method_during_level_streaming (ActorUpdateOverlapsMethod): [Read-Write] Update Overlaps Method During Level Streaming: Condition for calling UpdateOverlaps() to initialize overlap state when loaded in during level streaming. If set to ‘UseConfigDefault’, the default specified in ini (displayed in ‘DefaultUpdateOverlapsMethodDuringLevelStreaming’) will be used. If overlaps are not initialized, this actor and attached components will not have an initial state of what objects are touching it, and overlap events may only come in once one of those objects update overlaps themselves (for example when moving). However if an object touching it does initialize state, both objects will know about their touching state with each other. This can be a potentially large performance savings during level loading and streaming, and is safe if the object and others initially overlapping it do not need the overlap state because they will not trigger overlap notifications.

    Note that if ‘bGenerateOverlapEventsDuringLevelStreaming’ is true, overlaps are always updated in this case, but that flag determines whether the Begin/End overlap events are triggered. see: bGenerateOverlapEventsDuringLevelStreaming, DefaultUpdateOverlapsMethodDuringLevelStreaming, GetUpdateOverlapsMethodDuringLevelStreaming()

  • use_controller_rotation_pitch (bool): [Read-Write] Use Controller Rotation Pitch: If true, this Pawn’s pitch will be updated to match the Controller’s ControlRotation pitch, if controlled by a PlayerController.

  • use_controller_rotation_roll (bool): [Read-Write] Use Controller Rotation Roll: If true, this Pawn’s roll will be updated to match the Controller’s ControlRotation roll, if controlled by a PlayerController.

  • use_controller_rotation_yaw (bool): [Read-Write] Use Controller Rotation Yaw: If true, this Pawn’s yaw will be updated to match the Controller’s ControlRotation yaw, if controlled by a PlayerController.

add_controller_pitch_input(val) None

Add input (affecting Pitch) to the Controller’s ControlRotation, if it is a local PlayerController. This value is multiplied by the PlayerController’s InputPitchScale value. see: PlayerController::InputPitchScale

Parameters

val (float) – Amount to add to Pitch. This value is multiplied by the PlayerController’s InputPitchScale value.

add_controller_roll_input(val) None

Add input (affecting Roll) to the Controller’s ControlRotation, if it is a local PlayerController. This value is multiplied by the PlayerController’s InputRollScale value. see: PlayerController::InputRollScale

Parameters

val (float) – Amount to add to Roll. This value is multiplied by the PlayerController’s InputRollScale value.

add_controller_yaw_input(val) None

Add input (affecting Yaw) to the Controller’s ControlRotation, if it is a local PlayerController. This value is multiplied by the PlayerController’s InputYawScale value. see: PlayerController::InputYawScale

Parameters

val (float) – Amount to add to Yaw. This value is multiplied by the PlayerController’s InputYawScale value.

add_look_up_input(val)

deprecated: ‘add_look_up_input’ was renamed to ‘add_controller_pitch_input’.

add_movement_input(world_direction, scale_value=1.000000, force=False) None

Add movement input along the given world direction vector (usually normalized) scaled by ‘ScaleValue’. If ScaleValue < 0, movement will be in the opposite direction. Base Pawn classes won’t automatically apply movement, it’s up to the user to do so in a Tick event. Subclasses such as Character and DefaultPawn automatically handle this input and move. see: GetPendingMovementInputVector(), GetLastMovementInputVector(), ConsumeMovementInputVector()

Parameters
  • world_direction (Vector) – Direction in world space to apply input

  • scale_value (float) – Scale to apply to input. This can be used for analog input, ie a value of 0.5 applies half the normal value, while -1.0 would reverse the direction.

  • force (bool) – If true always add the input, ignoring the result of IsMoveInputIgnored().

add_pitch_input(val)

deprecated: ‘add_pitch_input’ was renamed to ‘add_controller_pitch_input’.

add_roll_input(val)

deprecated: ‘add_roll_input’ was renamed to ‘add_controller_roll_input’.

add_turn_input(val)

deprecated: ‘add_turn_input’ was renamed to ‘add_controller_yaw_input’.

add_yaw_input(val)

deprecated: ‘add_yaw_input’ was renamed to ‘add_controller_yaw_input’.

property ai_controller_class

[Read-Write] AIController Class: Default class to use when pawn is controlled by AI.

Type

(type(Class))

property base_eye_height

[Read-Write] Base Eye Height: Base eye height above collision center.

Type

(float)

property can_affect_navigation_generation

[Read-Only] Can Affect Navigation Generation: If set to false (default) given pawn instance will never affect navigation generation (but components could). Setting it to true will result in using regular AActor’s navigation relevancy calculation to check if this pawn instance should affect navigation generation. note: Use SetCanAffectNavigationGeneration() to change this value at runtime. note: Modifying this value at runtime will result in any navigation change only if runtime navigation generation is enabled. note: Override UpdateNavigationRelevance() to propagate the flag to the desired components. see: SetCanAffectNavigationGeneration(), UpdateNavigationRelevance()

Type

(bool)

consume_movement_input_vector() Vector

Returns the pending input vector and resets it to zero. This should be used during a movement update (by the Pawn or PawnMovementComponent) to prevent accumulation of control input between frames. Copies the pending input vector to the saved input vector (GetLastMovementInputVector()).

Returns

The pending input vector.

Return type

Vector

property controller_class

‘controller_class’ was renamed to ‘ai_controller_class’.

Type

deprecated

detach_from_controller_pending_destroy() None

Call this function to detach safely pawn from its controller, knowing that we will be destroyed soon.

get_base_aim_rotation() Rotator

Return the aim rotation for the Pawn. If we have a controller, by default we aim at the player’s ‘eyes’ direction that is by default the Pawn rotation for AI, and camera (crosshair) rotation for human players.

Return type

Rotator

get_control_rotation() Rotator

Get the rotation of the Controller, often the ‘view’ rotation of this Pawn.

Return type

Rotator

get_controller() Controller

Returns controller for this actor.

Return type

Controller

get_last_movement_input_vector() Vector

Return the last input vector in world space that was processed by ConsumeMovementInputVector(), which is usually done by the Pawn or PawnMovementComponent. Any user that needs to know about the input that last affected movement should use this function. For example an animation update would want to use this, since by default the order of updates in a frame is: PlayerController (device input) -> MovementComponent -> Pawn -> Mesh (animations) see: AddMovementInput(), GetPendingMovementInputVector(), ConsumeMovementInputVector()

Returns

The last input vector in world space that was processed by ConsumeMovementInputVector().

Return type

Vector

get_local_viewing_player_controller() PlayerController

Returns local Player Controller viewing this pawn, whether it is controlling or spectating

Return type

PlayerController

classmethod get_movement_base_actor(pawn) Actor

Gets the owning actor of the Movement Base Component on which the pawn is standing.

Parameters

pawn (Pawn) –

Return type

Actor

get_movement_component() PawnMovementComponent

Return our PawnMovementComponent, if we have one.

Return type

PawnMovementComponent

get_nav_agent_location() Vector

Basically retrieved pawn’s location on navmesh

Return type

Vector

get_pending_movement_input_vector() Vector

Return the pending input vector in world space. This is the most up-to-date value of the input vector, pending ConsumeMovementInputVector() which clears it, Usually only a PawnMovementComponent will want to read this value, or the Pawn itself if it is responsible for movement. see: AddMovementInput(), GetLastMovementInputVector(), ConsumeMovementInputVector()

Returns

The pending input vector in world space.

Return type

Vector

is_bot_controlled() bool

Returns true if controlled by a bot.

Return type

bool

is_controlled() bool

Is Controlled

Return type

bool

is_locally_controlled() bool

Returns true if controlled by a local (not network) Controller.

Return type

bool

is_locally_viewed() bool

Is this pawn the ViewTarget of a local PlayerController? Helpful for determining whether the pawn is visible/critical for any VFX. NOTE: Technically there may be some cases where locally controlled pawns return false for this, such as if you are using a remote camera view of some sort. But generally it will be true for locally controlled pawns, and it will always be true for pawns that are being spectated in-game or in Replays.

Return type

bool

is_move_input_ignored() bool

Helper to see if move input is ignored. If our controller is a PlayerController, checks Controller->IsMoveInputIgnored().

Return type

bool

is_pawn_controlled() bool

Check if this actor is currently being controlled at all (the actor has a valid Controller, which will be false for remote clients)

Return type

bool

is_player_controlled() bool

Returns true if controlled by a human player (possessed by a PlayerController). This returns true for players controlled by remote clients

Return type

bool

property last_hit_by

[Read-Only] Last Hit By: Controller of the last Actor that caused us damage.

Type

(Controller)

pawn_make_noise(loudness, noise_location, use_noise_maker_location=True, noise_maker=None) None

Inform AIControllers that you’ve made a noise they might hear (they are sent a HearNoise message if they have bHearNoises==true) The instigator of this sound is the pawn which is used to call MakeNoise.

Parameters
  • loudness (float) – is the relative loudness of this noise (range 0.0 to 1.0). Directly affects the hearing range specified by the AI’s HearingThreshold.

  • noise_location (Vector) – Position of noise source. If zero vector, use the actor’s location.

  • use_noise_maker_location (bool) – If true, use the location of the NoiseMaker rather than NoiseLocation. If false, use NoiseLocation.

  • noise_maker (Actor) – Which actor is the source of the noise. Not to be confused with the Noise Instigator, which is responsible for the noise (and is the pawn on which this function is called). If not specified, the pawn instigating the noise will be used as the NoiseMaker

property player_replication_info

‘player_replication_info’ was renamed to ‘player_state’.

Type

deprecated

property player_state

[Read-Only] Player State: If Pawn is possessed by a player, points to its Player State. Needed for network play as controllers are not replicated to clients.

Type

(PlayerState)

receive_controller_changed(old_controller, new_controller) None

Event called after a pawn’s controller has changed, on the server and owning client. This will happen at the same time as the delegate on GameInstance

Parameters
property receive_controller_changed_delegate

[Read-Write] Receive Controller Changed Delegate: Event called after a pawn’s controller has changed, on the server and owning client. This will happen at the same time as the delegate on GameInstance

Type

(PawnControllerChangedSignature)

receive_possessed(new_controller) None

Event called when the Pawn is possessed by a Controller. Only called on the server (or in standalone)

Parameters

new_controller (Controller) –

receive_restarted() None

Event called after a pawn has been restarted, usually by a possession change. This is called on the server for all pawns and the owning client for player pawns

property receive_restarted_delegate

[Read-Write] Receive Restarted Delegate: Event called after a pawn has been restarted, usually by a possession change. This is called on the server for all pawns and the owning client for player pawns

Type

(PawnRestartedSignature)

receive_unpossessed(old_controller) None

Event called when the Pawn is no longer possessed by a Controller. Only called on the server (or in standalone)

Parameters

old_controller (Controller) –

set_can_affect_navigation_generation(new_value, force_update=False) None

Use SetCanAffectNavigationGeneration to change this value at runtime. Note that calling this function at runtime will result in any navigation change only if runtime navigation generation is enabled.

Parameters
  • new_value (bool) –

  • force_update (bool) –

spawn_default_controller() None

Spawn default controller for this Pawn, and get possessed by it.

property use_controller_rotation_pitch

[Read-Write] Use Controller Rotation Pitch: If true, this Pawn’s pitch will be updated to match the Controller’s ControlRotation pitch, if controlled by a PlayerController.

Type

(bool)

property use_controller_rotation_roll

[Read-Write] Use Controller Rotation Roll: If true, this Pawn’s roll will be updated to match the Controller’s ControlRotation roll, if controlled by a PlayerController.

Type

(bool)

property use_controller_rotation_yaw

[Read-Write] Use Controller Rotation Yaw: If true, this Pawn’s yaw will be updated to match the Controller’s ControlRotation yaw, if controlled by a PlayerController.

Type

(bool)