Subsequences Track

Organize and enable multiple artists to work in the same sequence by using the Subsequences Track.

See Also

In large-scale cinematic productions, it may be necessary to have multiple artists working on the same sequence or even shot at the same time. The Subsequences Track enables this type of workflow by allowing additional sequence assets to be contained within the same sequence. Subsequences can also be used to organize your scene so that repetitive tracks and content are partitioned away into their respective disciplines' subsequence.

This document provides an overview of how to create and use the Subsequences Track.

Prerequisites

Creation

To create a Subsequences Track, click the Add (+) Track button in Sequencer and select Subsequences Track.

create subsequence track

From there you can add sequences by either clicking Add (+) Sequence and selecting a sequence from the menu, or by dragging a Level Sequence from the Content Browser onto the Subsequences Track.

add subsequence

Once added, a subsequence section will display the name of its corresponding Level Sequence and the number of tracks contained within it.

subsequence information

Working in the Subsequence

Once a subsequence is added to a sequence, it can be opened by double-clicking its section. When you open a subsequence in this way, it will be displayed within the context of the parent sequence. This means it continues to evaluate tracks from the parent in order to provide the full scene context, even though the current Sequencer view only shows the subsequence.

subsequence context

When viewing subsequences from the parent sequence context, start and end times will be displayed for both the base subsequence, and the trimmed subsequence. In this example, you can see a subsequence with both the Start and End times being trimmed in the parent sequence, and how that information is displayed in the subsequence.

subsequence trim view

  1. The trimmed area. This is the region that will be played from the parent sequence.

  2. The full playable sequence area. This area has been trimmed, and will not play in its entirety.

Conversely, you can also trim the Start and End times within a subsequence and observe the trimmed region from the parent sequence.

subsequence trim view

This context view can be enabled or disabled by toggling Evaluate Sub Sequences In Isolation from Sequencer's Playback Menu.

When working within subsequences, you can add tracks, keyframes and other content as with any other sequence, and can preview the results alongside the contents in the parent sequence. As such, subsequences are not only useful for limiting file conflicts, but also for compartmentalizing Sequencer content within different subsequences.

subsequence light

Unlike Shots, multiple subsequences that are stacked in Sequencer will not overwrite the bottom ones. All subsequences will evaluate when played at the same time.

Collaboration

As subsequences affect a different Level Sequence from the main sequence, multiple artists can work on a single cinematic at the same time without any file conflicts occurring. In this example, you can see two different subsequences being used to contain content from both the Visual Effects and Lighting disciplines.

sequencer artist collaboration

Hierarchical Bias

Due to the nature of the Master Sequence, Shot, and Subsequence systems, there may be cases where the same Actor is being referenced by both the shot and the master, which can cause conflicts. Hierarchical Bias can be used to arbitrate which reference of that Actor should be prioritized to evaluate over other sources. This property is found when right-clicking Shots or Subsequences, navigating to the Properties menu, and locating Hierarchical Bias.

hierarchical bias

Increasing the bias number on a source will cause that source to "win", decreasing the number will cause it to "lose", and having equal bias between sources will cause all sources to evaluate together and blend (if possible).

The default value for Hierarchical Bias on the top-level (master) sequence is 0, while for subsequences it is 100. This causes shot sources to take precedence over master sources. Bias also compounds for each subseqeunce layer added, so if a shot sequence contained a child subsequence, then it would have a total bias of 200 (100 + 100), causing the deepest level of influence to "win'' by default.

This effect is demonstrated in the image below, where:

hierarchical bias visualized

  1. The root sequence, which has a default bias of 0, and cumulative bias of 0.

  2. The first child sequence, which has a default bias of 100, and cumulative bias of 100.

  3. The second child sequence, which has a default bias of 100, and cumulative bias of 200.

Bias Example

The following example demonstrates how to utilize Hierarchical Bias values in your sequences.

A Light Actor is placed in a Level, and is referenced by three different sequences:

  • The Master Sequence references this light, and its color is keyframed to red.

    master sequence hierarchical bias

  • Within the Master Sequence is a Shot, and its color is keyframed to green.

    shot hierarchical bias

  • Within the Shot, is a Subsequence, and its color is keyframed to blue.

    subsequence hierarchical bias

By default, the Subsequence, and blue light take priority, because it has the largest cumulative bias. For reference, each sequence's bias value is listed below:

  • Master Sequence = 0

  • First child sequence = 100

  • Second child sequence = 200 (100 + 100)

low hierarchical bias

If you right-click the Subsequence section and lower its hierarchical bias to -50, then that will cause the Shot, and green light to take priority. This is because the Subsequence's cumulative bias is now smaller than its parent, causing the green light to have the largest bias.

At this point, each sequence's bias value would be:

  • Root Sequence = 0

  • First child sequence = 100

  • Second child sequence = 50 (100 - 50)

medium hierarchical bias

Setting all the bias values to 0 will cause all sequences to evaluate together and the results will be blended. In this example, the red, green, and blue light color values are combined, becoming white.

At this point, each sequence's bias value would be:

  • Root Sequence = 0

  • First child sequence = 0

  • Second child sequence = 0 (0 + 0)

equal hierarchical bias

Section Editing

Each subsequence section functions similar to most Sections, meaning they can be moved, trimmed or edited.

edit trim subsequence

To differentiate your subsequences from one another, you can change the color that is displayed on all sections in a track by clicking the color bar on the track header. This will open the Color Picker from which you can select a new color for this track.

subsequence color

Looping

When extending the section beyond its default time, it expands the sequence's playback range in a linear fashion. If you want to loop the sequence instead, right-click on the section and enable Properties > Can Loop.

loop subsequence

Properties

Right-clicking a subsequence section and navigating to the Properties menu will reveal the following properties:

subsequence properties

Name

Description

Time Scale

Controls the playback rate of the subsequence. A value of 1 will result in a normal playback speed, larger numbers will play faster, and smaller numbers will play slower.

Hierarchical Bias

Controls the Hierarchical Bias of the subsequence. Larger numbers will cause this subsequence to take priority over other sources when referencing the same Actors.

Sub Sequence

The sequence asset that is played by this subsequence.

Network Mask

The network realm that this subsequence is hosted on. This can be set to Client, Server, or Both. It is important to set this appropriately depending on your sequence's content. For example, if a subsequence contains only audio, then it should usually be set to Client only as audio is not played over the server.

Tags