Streaming Virtual Texturing

An overview of Streaming Virtual Textures.


Streaming Virtual Texturing (SVT) is an alternative way to stream textures in your project from disk, having several advantages—along with some disadvantages—when compared to existing mip-based Texture Streaming in Unreal Engine 4 (UE4).

Traditional mip-based texture streaming performs offline analysis of material UV usage and then at runtime decides which mip levels of a texture to load based on object visibility and distance. This process can be limiting because streaming data considered is the full texture mip levels. When using high-resolution textures, loading a higher mip level of a texture can potentially have significant performance and memory overhead. Also, mip-based texture streaming decisions are made by the CPU using CPU-based object visibility and culling. Visibility is more conservative—meaning something is more likely to be loaded than not—to avoid objects popping into view. So, if even a small part of the object is visible, the entire object is considered visible. The object loaded including any associated textures that may be required to stream in.

In contrast, the virtual texturing system only streams in parts of the textures that are required to be visible. It does this by splitting all mip levels into tiles of a small, fixed size. The GPU determines which of the of the visible tiles are accessed by all visible pixels on the screen. This means that when an object is considered visible, it's communicated to the GPU which loads the required tiles into a GPU memory cache. No matter the size of the texture, the fixed tile size of the SVTs only consider the ones that are visible. Tile visibility is computed on the GPU using standard depth buffers causing SVT requests to only happen for visible parts that affect pixels.

Enabling Virtual Texturing

In the Project Settings under Engine > Rendering > Virtual Textures, check the box next to Enable virtual texture support.

Click image for full size.

Under the Editor > Texture Import > Virtual Textures category in the Project Settings, you can specify a minimum texture size to consider newly imported textures for SVT. If a texture meets that minimum size, Virtual Texture Streaming will be enabled for that Texture Asset automatically.

For information on these settings, see Virtual Texturing Reference page.

Converting Textures and Materials

Enabling virtual texturing for your project means that Textures and Materials require some setup to work correctly; the Texture must enable Virtual Texture Streaming support, and the Material's Texture Samples are required to use a Virtual Sampler Type instead of a non-Virtual one.

Choose from the options below to properly set up your textures and materials for use with SVT.

Conversion Menu Option

  1. Select any Texture Asset in the Content Browser that you want to convert to use SVT.

  2. Right-click to open the context menu and select Convert to Virtual Texture.


    This menu option also enables you to convert from a virtual texture to a regular texture as well.

  3. The Convert To window lists any Texture(s) that have been selected and any Materials that reference them.


  4. Click Ok to start the conversion process.

During the conversion process, Texture Assets will have Virtual Texture Streaming enabled for them in their Texture Editor settings. Materials that reference the selected texture(s) will convert the Texture Sample nodes to use the Virtual Sampler Type instead of the non-Virtual Sampler Type.

Manual Conversion

  1. Open the Texture Editor for a given Texture Asset by double-clicking it in the Content Browser.

  2. In the Details panel under Texture, enable Virtual Texture Streaming.


Enabling this without using the conversion menu option above will immediately invalidate any existing Materials that reference a converted texture. You should open any Materials that reference the offending texture and set the Texture Sample node to use the correct Virtual Sampler Type. For example, a virtual texture should use a Sampler Type of Virtual Color instead of Color.

When you encounter a Texture Sample node that is not using the correct Sampler Type, an error message is displayed in the Stats panel and along the bottom of the node, like this:


  1. The error message identifies the wrong Sampler Type for the assigned VT Texture Sample expression.

  2. Change the Texture Sample's Sampler Type to be one of the Virtual types.

  3. The VT Texture Sample correctly renders, indicated by the "VT" in the lower-right of the expression.

When adding a virtual texture to a Material Graph, the Virtual sampler type is assigned automatically. However, should you make the expression a Texture Sample Parameter that can be used in Material Instances, keep in mind that the base material applies the Virtual sampler type to all child instances. A virtual texture cannot be assigned to a texture parameter slot that's not already of Virtual type in the base Material.

UDIM Support

U-Dimension (or "UDIM") is a texture naming convention that enables multiple texture images to map to separate UV regions on a Static Mesh or Skeletal Mesh model. When using the UDIM naming convention, groups of image files are imported as a single Virtual Texture Asset.

Virtual texturing support for UDIMs is beneficial for a couple of reasons:

  • It works with many separate, smaller textures instead of extremely large textures.

  • Each UDIM image can have a different resolution enabling virtual textures that have non-uniform pixel density.

For example, if you import a UDIM virtual texture made up of four image files—two 2048x2048 and two 128x128 textures—arranged in a 2x2 pattern, the virtual texture logically samples these images like a single 4098x4098 texture. The smaller 128x128 images are stretched to fill the same area as the larger 2048x2048 images without disk or runtime memory usage affected. Having the smaller 128x128 textures fill a 2048x2048 texture resolution doesn't consume any memory in this case.

For additional information on UDIM workflows, see The Foundry's UDIM Workflow tutorial.

Start using UDIM textures with virtual texturing in your own projects by using this naming convention::

BaseName.####.[Support Image Format]

For example:


When an image is imported matching this naming convention, the source folder is scanned for any additional images matching the same BaseName followed by a different coordinate number. For each image that is located, the four digit number defines the location that the image should be mapped to. Importing traditional textures map to the mesh UVs in the range of 0-1, however, UDIM image maps to a UV 0-1 space based on its defined UV coordinate.

This grid represents UV mappings to different four digit coordinates that you can use to store your images:


UVs 0-1 map to the image at 1001 giving you you the named texture MyTexture.1001.png. The UDIM index 1001 is the root for this image. If the U coordinate goes from 1-1, you'd have MyTexture.1002.png. If the V coordinate goes from 1-2, you'd have MyTexture.1011.png.

Performance and Cost

Measure the performance and cost of virtual texturing in your project using the sections below:

Stat Virtual Texturing

Open the console using the backtick (`) key and enter the following commands to enable their stats information:

Use stat virtualtexturing to see details about the virtual texturing scene cost in milliseconds (ms) and counters for page tables.


Use stat virtualtexturememory to display relevant memory counters related to the use of virtual texturing in the current scene.


Streaming Virtual Texturing Visualization

Use the console command r.VT.Borders 1 to draw a mip visualization grid on Materials that use streaming virtual textures.


Use r.VT.Borders 0 to hide the grid when you no longer need it.

Material Lookups and Stacks

Sampling from a virtual texture in your materials is more expensive than sampling a traditional texture. The cost of virtual texturing is broken down into two categories:

  • Lookups happen for each Virtual Texture that is sampled in the Material Graph.

  • Stacks combine Virtual Textures when the same UVs and Sampler Source are used.

Virtual Textures will always be more expensive than traditional textures sample. There will always be at least two texture fetches and some math instructions. However, some of that cost is amortized by combining the stacks (up to 8) for the VT texture samples that use the same UVs and Sampler Source.

In this simple Material example, there are two VT Texture Sample expressions using default UVs that are being sampled. A Virtual Texture Lookup is added for each lookup of that texture sample and since both are using a single UV, they are combined into a single Virtual Texture Stack:


However, if different UVs were being used, the cost increases with two Virtual Texture Stack fetches:


The first example uses three texture fetches total; two lookups and one stack. Because the VT samples use the same UVs, their stacks are combined to save a texture fetch. In the second example, there is a total of four texture fetches; two lookups and two stacks. The VT Texture Samples use different UVs for the Base Color and Normal Texture Samples meaning they cannot be combined into a single stack.

Additional Material Notes

  • Streaming virtual textures are split into fixed size tiles for each texture, no matter its size. The lowest resolution mip is limited by the tile size. In many cases, this won't be an issue, however, textures with a lot of noise or high detail may exhibit aliasing or Moiré effects due to lack of low-resolution mips. Keep in mind that this also poses potential GPU performance cost, although that can be difficult to measure in practice.


In general, virtual textures are interchangeable with regular textures with exception that there are some limitations and added cost:

  • Texture dimensions must be a power of 2 but are not required to be square by nature. However, they utilize memory more efficiently in the current implementation.

  • Support for trilinear filtering between mips is done in a stochastic manor. When using Temporal Anti-Aliasing (TAA), it is nearly indistinguishable from regular trilinear filtering but can introduce some visible noise in cases.

  • Support for anisotropic filtering is limited by the size of the Tile Border setting. The default value of 4 allows for less anisotropic filtering than is typical for textures but increasing this value increases memory usage.

  • VT streaming is reactive by nature, meaning that the CPU doesn't know it needs to load a given VT tile until afters it has already been required by a rendered frame. So, as the camera moves through the scene, some visible popping in may occur, especially as higher resolution VT tiles are loaded.

Select Skin
언리얼 엔진 문서의 미래를 함께 만들어주세요! 더 나은 서비스를 제공할 수 있도록 문서 사용에 대한 피드백을 주세요.
설문조사에 참여해 주세요

새로운 언리얼 엔진 4 문서 사이트에 오신 것을 환영합니다!

문서 사이트에 대한 의견을 모을 수 있는 피드백 시스템을 포함해서 여러가지 새로운 기능을 준비하고 있습니다. 아래 Documentation Feedback 포럼(영문) 또는 언리얼 엔진 네이버 공식 카페(한글) 중 편하신 곳에 의견이나 문제점을 알려 주세요.

새 시스템이 준비되면 알려 드리겠습니다.

네이버 카페
공식 포럼