Language:
Page Info
Engine Version:

Landscape UI Reference

Choose your OS:

This document contains references to all of the icons for the Landscape system and editor.

icon_Landscape_Mode_Manage_40x.png

Manage

This mode allows you to create new Landscapes, add or remove sections from an existing Landscape, move the Landscape, and add Splines to a Landscape.

LS_TableSpacer.png icon_Landscape_New_Landscape_40x.png

New Landscape

Creates a new Landscape using the parameters in the New Landscape category.

LS_TableSpacer.png icon_Landscape_Tool_Selection_40x.png

Selection

Selects a section of the Landscape, allowing for per-section overrides of some properties, such as Materials and lighting properties.

LS_TableSpacer.png icon_Landscape_Tool_AddComponent_40x.png

Add

Adds a section of Landscape to the current Landscape. Or adds a number of sections based on the value in brush size.

LS_TableSpacer.png icon_Landscape_Tool_DeleteComponent_40x.png

Delete

Removes a section of the Landscape. Unlike using the visibility tool, this will completely remove that section of Landscape data, deleting the data.

LS_TableSpacer.png icon_Landscape_Tool_MoveToLevel_40x.png

Move Level

Moves the selected components to the specified streaming level.

LS_TableSpacer.png icon_Landscape_Tool_Copy_40x.png

Change Component Size

Changes the size of components, and the size of the Landscape, according to the settings.

LS_TableSpacer.png icon_Landscape_Tool_Splines_40x.png

Edit Splines

While using this tool, Ctrl + Left clicking on the Landscape will place a node for a spline. If a node is selected and another node is placed, the tool will connect the new node to the previous node. If no nodes are selected, a new start node will be placed.

icon_Landscape_Mode_Sculpt_40x.png

Sculpt

This mode allows you to sculpt the look of your Landscape heightmap so that it fits your project's needs.

LS_TableSpacer.png icon_Landscape_Tool_Sculpt_40x.png

Sculpt Tool

Raises and lowers the Landscape within the brushes influence. Use Left Mouse Button to raise or Shift + Left Mouse Button to lower the Landscape.

LS_TableSpacer.png icon_Landscape_Tool_Smooth_40x.png

Smooth Tool

Smoothes the Landscape within the brushes influence by averaging the Z position of the Landscape verts.

LS_TableSpacer.png icon_Landscape_Tool_Flatten_40x.png

Flatten Tool

This tool will raise and lower the Landscape in its influence to be the same Z height as the location you started using the tool.

LS_TableSpacer.png icon_Landscape_Tool_Ramp_40x.png

Ramp Tool

This tool will create a ramp between two specified points, adding falloffs according to the settings. Note that this tool cannot use any brushes.

LS_TableSpacer.png icon_Landscape_Tool_Erosion_40x.png

Erosion Tool

The Erosion tool uses a thermal erosion simulation to adjust the height of the heightmap. This simulates the transfer of soil from higher elevations to lower elevations. The larger the difference in elevation, the more erosion will occur. This tool also applies a noise effect on top of the erosion, if desired, to provide a more natural random appearance.

LS_TableSpacer.png icon_Landscape_Tool_HydraulicErosion_40x.png

Hydro Erosion

The Hydro Erosion tool uses a hydraulic erosion simulation, i.e. erosion from water, to adjust the height of the heightmap. A noise filter is used to determine where the initial rain is distributed. Then the simulation is calculated to determine water flow from that initial rain as well as dissolving, water transfer, and evaporation. The result of that calculation provides the actual value used to lower the heightmap.

LS_TableSpacer.png icon_Landscape_Tool_Noise_40x.png

Noise Tool

The Noise tool applies a noise filter to the heightmap or layer weight. The strength determines the amount of noise.

LS_TableSpacer.png icon_Landscape_Tool_Retopologize_40x.png

Retopologize

Similar to the smooth too, Retopologize will push and pull triangles to smooth the transition of the terrain, however it will attempt to keep the basic form of the terrain, minimizing change in the Z direction. An X/Y offset map makes the Landscape slower to render and paint on with other tools, so only use the Retopologize tool if needed.

LS_TableSpacer.png icon_Landscape_Tool_Visibility_40x.png

Visibility

This tool will allow you to mask out the visibility and collision of areas of your Landscape when used in conjunction with the Landscape Hole Material .

LS_TableSpacer.png icon_Landscape_Tool_Mask_40x.png

Selection

Permits you to lay down a mask on the Landscape to control what you sculpt or paint on more accurately; allows you to protect sections of the Landscape from editing.

LS_TableSpacer.png icon_Landscape_Tool_Copy_40x.png

Copy/Paste

Copy and Paste allows you to copy terrain data from one area of the Landscape and paste it to another area of the Landscape. You can even save out the copy paste data to use in other Landscapes.

LS_TableSpacer.png icon_Mirror_Tool_40x.png

Mirror Tool

This tool enables you to copy one side of a landscape to the other side so that you can easily mirror or rotate the landscape geometry.

icon_Landscape_Mode_Paint_40x.png

Paint

This mode allows you to modify the appearance of your Landscape by selectively applying different materials to different parts of your Landscape.

LS_TableSpacer.png icon_Landscape_Tool_Paint_40x.png

Paint Tool

The Paint tool increases or decreases the weight of the Material layer being applied to the Landscape.

LS_TableSpacer.png icon_Landscape_Tool_Smooth_40x.png

Smooth Tool

Smoothes the weighting of the layers of the Landscape's Material, creating smooth transitions between zones.

LS_TableSpacer.png icon_Landscape_Tool_Flatten_40x.png

Flatten Tool

Taking the starting location of the tool, this will spread those layer weights to where you stroke.

LS_TableSpacer.png icon_Landscape_Tool_Noise_40x.png

Noise Tool

The Noise tool applies a noise filter to the heightmap or layer weight. The strength determines the amount of noise.

icon_Landscape_Mode_Paint_40x.png

Brushes

This section allows you to modify the appearance and effect of the brush that is used when you are painting or sculpting the Landscape.

LS_TableSpacer.png icon_Landscape_Brush_Circle_smooth_40x.png

Circle Brush

This is just a simple circular brush. When using a falloff greater than 0 with this brush will create a softer edge while painting or sculpting.

LS_TableSpacer.png icon_Landscape_Brush_Alpha_40x.png

Alpha Brush

Orients a mask image with the brush stroke. You will be given the option of which channel to use from the image chosen to be the mask.

LS_TableSpacer.png icon_Landscape_Brush_Pattern_40x.png

Pattern Brush

This will lay a repeating mask across the entire terrain.

LS_TableSpacer.png icon_Landscape_Brush_Component_40x.png

Component Brush

This works only on Landscape components by moving entire components up or down. The size of the brush defines the number of sections that are affected at one time.

icon_Landscape_Mode_Paint_40x.png

Brush Falloff

This section allows you to modify how your brushes falloff.

LS_TableSpacer.png icon_Landscape_Brush_Circle_smooth_40x.png

Smooth Falloff

A falloff with a nice lead in and lead out.

LS_TableSpacer.png icon_Landscape_Brush_Circle_linear_40x.png

Linear Falloff

A constant falloff.

LS_TableSpacer.png icon_Landscape_Brush_Circle_spherical_40x.png

Spherical Falloff

This falloff starts slow then finishes quickly as it approaches the edge of the brush.

LS_TableSpacer.png icon_Landscape_Brush_Circle_tip_40x.png

Tip Falloff

This falloff drops off quickly, then levels off, having a light, but smooth gradient out. Best when you want precision and a bit of over paint.