unreal.SkinnedMeshComponent

class unreal.SkinnedMeshComponent(outer=None, name='None')

Bases: unreal.MeshComponent

Skinned mesh component that supports bone skinned mesh rendering. This class does not support animation. see: USkeletalMeshComponent

C++ Source:

  • Module: Engine

  • File: SkinnedMeshComponent.h

Editor Properties: (see get_editor_property/set_editor_property)

  • absolute_location (bool): [Read-Write] Absolute Location: If RelativeLocation should be considered relative to the world, rather than the parent

  • absolute_rotation (bool): [Read-Write] Absolute Rotation: If RelativeRotation should be considered relative to the world, rather than the parent

  • absolute_scale (bool): [Read-Write] Absolute Scale: If RelativeScale3D should be considered relative to the world, rather than the parent

  • affect_distance_field_lighting (bool): [Read-Write] Affect Distance Field Lighting: Controls whether the primitive should affect dynamic distance field lighting methods. This flag is only used if CastShadow is true. *

  • affect_dynamic_indirect_lighting (bool): [Read-Write] Affect Dynamic Indirect Lighting: Controls whether the primitive should inject light into the Light Propagation Volume. This flag is only used if CastShadow is true. *

  • allow_cull_distance_volume (bool): [Read-Write] Allow Cull Distance Volume: Whether to accept cull distance volumes to modify cached cull distance.

  • always_create_physics_state (bool): [Read-Write] Always Create Physics State: Indicates if we’d like to create physics state all the time (for collision and simulation). If you set this to false, it still will create physics state if collision or simulation activated. This can help performance if you’d like to avoid overhead of creating physics state when triggers

  • apply_impulse_on_damage (bool): [Read-Write] Apply Impulse on Damage: True for damage to this component to apply physics impulse, false to opt out of these impulses.

  • asset_user_data (Array(AssetUserData)): [Read-Write] Asset User Data: Array of user data stored with the component

  • auto_activate (bool): [Read-Write] Auto Activate: Whether the component is activated at creation or must be explicitly activated.

  • body_instance (BodyInstance): [Read-Write] Body Instance: Physics scene information for this component, holds a single rigid body with multiple shapes.

  • bounds_scale (float): [Read-Write] Bounds Scale: Scales the bounds of the object. This is useful when using World Position Offset to animate the vertices of the object outside of its bounds. Warning: Increasing the bounds of an object will reduce performance and shadow quality! Currently only used by StaticMeshComponent and SkeletalMeshComponent.

  • cached_max_draw_distance (float): [Read-Only] Cached Max Draw Distance: The distance to cull this primitive at. A CachedMaxDrawDistance of 0 indicates that the primitive should not be culled by distance.

  • can_character_step_up_on (CanBeCharacterBase): [Read-Write] Can Character Step Up On: Determine whether a Character can step up onto this component. This controls whether they can try to step up on it when they bump in to it, not whether they can walk on it after landing on it. see: FWalkableSlopeOverride

  • can_ever_affect_navigation (bool): [Read-Write] Can Ever Affect Navigation: Whether this component can potentially influence navigation

  • capsule_indirect_shadow_min_visibility (float): [Read-Write] Capsule Indirect Shadow Min Visibility: Controls how dark the capsule indirect shadow can be.

  • cast_capsule_direct_shadow (bool): [Read-Write] Cast Capsule Direct Shadow: Whether to use the capsule representation (when present) from a skeletal mesh’s ShadowPhysicsAsset for direct shadowing from lights. This type of shadowing is approximate but handles extremely wide area shadowing well. The softness of the shadow depends on the light’s LightSourceAngle / SourceRadius. This flag will force bCastInsetShadow to be enabled.

  • cast_capsule_indirect_shadow (bool): [Read-Write] Cast Capsule Indirect Shadow: Whether to use the capsule representation (when present) from a skeletal mesh’s ShadowPhysicsAsset for shadowing indirect lighting (from lightmaps or skylight).

  • cast_cinematic_shadow (bool): [Read-Write] Cast Cinematic Shadow: Whether this component should cast shadows from lights that have bCastShadowsFromCinematicObjectsOnly enabled. This is useful for characters in a cinematic with special cinematic lights, where the cost of shadowmap rendering of the environment is undesired.

  • cast_contact_shadow (bool): [Read-Write] Cast Contact Shadow: Whether the object should cast contact shadows. This flag is only used if CastShadow is true.

  • cast_dynamic_shadow (bool): [Read-Write] Cast Dynamic Shadow: Controls whether the primitive should cast shadows in the case of non precomputed shadowing. This flag is only used if CastShadow is true. *

  • cast_far_shadow (bool): [Read-Write] Cast Far Shadow: When enabled, the component will be rendering into the far shadow cascades (only for directional lights).

  • cast_hidden_shadow (bool): [Read-Write] Cast Hidden Shadow: If true, the primitive will cast shadows even if bHidden is true. Controls whether the primitive should cast shadows when hidden. This flag is only used if CastShadow is true.

  • cast_inset_shadow (bool): [Read-Write] Cast Inset Shadow: Whether this component should create a per-object shadow that gives higher effective shadow resolution. Useful for cinematic character shadowing. Assumed to be enabled if bSelfShadowOnly is enabled.

  • cast_shadow (bool): [Read-Write] Cast Shadow: Controls whether the primitive component should cast a shadow or not.

  • cast_shadow_as_two_sided (bool): [Read-Write] Cast Shadow as Two Sided: Whether this primitive should cast dynamic shadows as if it were a two sided material.

  • cast_static_shadow (bool): [Read-Write] Cast Static Shadow: Whether the object should cast a static shadow from shadow casting lights. This flag is only used if CastShadow is true.

  • cast_volumetric_translucent_shadow (bool): [Read-Write] Cast Volumetric Translucent Shadow: Whether the object should cast a volumetric translucent shadow. Volumetric translucent shadows are useful for primitives with smoothly changing opacity like particles representing a volume, But have artifacts when used on highly opaque surfaces.

  • component_tags (Array(Name)): [Read-Write] Component Tags: Array of tags that can be used for grouping and categorizing. Can also be accessed from scripting.

  • component_use_fixed_skel_bounds (bool): [Read-Write] Component Use Fixed Skel Bounds: When true, skip using the physics asset etc. and always use the fixed bounds defined in the SkeletalMesh.

  • consider_all_bodies_for_bounds (bool): [Read-Write] Consider All Bodies for Bounds: If true, when updating bounds from a PhysicsAsset, consider _all_ BodySetups, not just those flagged with bConsiderForBounds.

  • consider_for_actor_placement_when_hidden (bool): [Read-Write] Consider for Actor Placement when Hidden: If true, this component will be considered for placement when dragging and placing items in the editor even if it is not visible, such as in the case of hidden collision meshes

  • custom_depth_stencil_value (int32): [Read-Write] Custom Depth Stencil Value: Optionally write this 0-255 value to the stencil buffer in CustomDepth pass (Requires project setting or r.CustomDepth == 3)

  • custom_depth_stencil_write_mask (RendererStencilMask): [Read-Write] Custom Depth Stencil Write Mask: Mask used for stencil buffer writes.

  • custom_primitive_data (CustomPrimitiveData): [Read-Write] Custom Primitive Data: Optional user defined default values for the custom primitive data of this primitive

  • detail_mode (DetailMode): [Read-Write] Detail Mode: If detail mode is >= system detail mode, primitive won’t be rendered.

  • disable_morph_target (bool): [Read-Write] Disable Morph Target: Disable Morphtarget for this component.

  • display_debug_update_rate_optimizations (bool): [Read-Write] Display Debug Update Rate Optimizations: Enable on screen debugging of update rate optimization. Red = Skipping 0 frames, Green = skipping 1 frame, Blue = skipping 2 frames, black = skipping more than 2 frames. todo:: turn this into a console command.

  • editable_when_inherited (bool): [Read-Write] Editable when Inherited: True if this component can be modified when it was inherited from a parent actor class

  • emissive_light_source (bool): [Read-Write] Emissive Light Source: Whether the primitive will be used as an emissive light source.

  • enable_auto_lod_generation (bool): [Read-Write] Enable Auto LODGeneration: Whether to include this component in HLODs or not.

  • enable_material_parameter_caching (bool): [Read-Write] Enable Material Parameter Caching

  • enable_update_rate_optimizations (bool): [Read-Write] Enable Update Rate Optimizations: if TRUE, Owner will determine how often animation will be updated and evaluated. See AnimUpdateRateTick() This allows to skip frames for performance. (For example based on visibility and size on screen).

  • exclude_for_specific_hlod_levels (Array(int32)): [Read-Write] Exclude for Specific HLODLevels: Which specific HLOD levels this component should be excluded from

  • exclude_from_light_attachment_group (bool): [Read-Write] Exclude from Light Attachment Group: If set, then it overrides any bLightAttachmentsAsGroup set in a parent.

  • fill_collision_underneath_for_navmesh (bool): [Read-Write] Fill Collision Underneath for Navmesh: If set, navmesh will not be generated under the surface of the geometry

  • force_mip_streaming (bool): [Read-Write] Force Mip Streaming: If true, forces mips for textures used by this component to be resident when this component’s level is loaded.

  • forced_lod_model (int32): [Read-Write] Forced Lod Model

  • generate_overlap_events (bool): [Read-Write] Generate Overlap Events

  • hidden_in_game (bool): [Read-Write] Hidden in Game: Whether to hide the primitive in game, if the primitive is Visible.

  • hidden_in_scene_capture (bool): [Read-Write] Hidden in Scene Capture: When true, will not be captured by Scene Capture

  • hlod_batching_policy (HLODBatchingPolicy): [Read-Write] HLODBatching Policy: Determines how the geometry of a component will be incorporated in proxy (simplified) HLODs.

  • ignore_master_pose_component_lod (bool): [Read-Write] Ignore Master Pose Component LOD: Flag that when set will ensure UpdateLODStatus will not take the MasterPoseComponent’s current LOD in consideration when determining the correct LOD level (this requires MasterPoseComponent’s LOD to always be >= determined LOD otherwise bone transforms could be missing

  • ignore_radial_force (bool): [Read-Write] Ignore Radial Force: Will ignore radial forces applied to this component.

  • ignore_radial_impulse (bool): [Read-Write] Ignore Radial Impulse: Will ignore radial impulses applied to this component.

  • indirect_lighting_cache_quality (IndirectLightingCacheQuality): [Read-Write] Indirect Lighting Cache Quality: Quality of indirect lighting for Movable primitives. This has a large effect on Indirect Lighting Cache update time.

  • is_editor_only (bool): [Read-Write] Is Editor Only: If true, the component will be excluded from non-editor builds

  • ld_max_draw_distance (float): [Read-Write] LDMax Draw Distance: Max draw distance exposed to LDs. The real max draw distance is the min (disregarding 0) of this and volumes affecting this object.

  • light_attachments_as_group (bool): [Read-Write] Light Attachments as Group: Whether to light this component and any attachments as a group. This only has effect on the root component of an attachment tree. When enabled, attached component shadowing settings like bCastInsetShadow, bCastVolumetricTranslucentShadow, etc, will be ignored. This is useful for improving performance when multiple movable components are attached together.

  • lighting_channels (LightingChannels): [Read-Write] Lighting Channels: Channels that this component should be in. Lights with matching channels will affect the component. These channels only apply to opaque materials, direct lighting, and dynamic lighting and shadowing.

  • lightmap_type (LightmapType): [Read-Write] Lightmap Type: Controls the type of lightmap used for this component.

  • master_pose_component (SkinnedMeshComponent): [Read-Write] Master Pose Component: If set, this SkeletalMeshComponent will not use its SpaceBase for bone transform, but will use the component space transforms from the MasterPoseComponent. This is used when constructing a character using multiple skeletal meshes sharing the same skeleton within the same Actor.

  • mesh_deformer (MeshDeformer): [Read-Write] Mesh Deformer: If set then the MeshDeformer will be used instead of the fixed animation pipeline.

  • min_draw_distance (float): [Read-Write] Min Draw Distance: The minimum distance at which the primitive should be rendered, measured in world space units from the center of the primitive’s bounding sphere to the camera position.

  • min_lod_model (int32): [Read-Write] Min Lod Model: This is the min LOD that this component will use. (e.g. if set to 2 then only 2+ LOD Models will be used.) This is useful to set on meshes which are known to be a certain distance away and still want to have better LODs when zoomed in on them.

  • mobility (ComponentMobility): [Read-Write] Mobility: How often this component is allowed to move, used to make various optimizations. Only safe to set in constructor.

  • multi_body_overlap (bool): [Read-Write] Multi Body Overlap: If true, this component will generate individual overlaps for each overlapping physics body if it is a multi-body component. When false, this component will generate only one overlap, regardless of how many physics bodies it has and how many of them are overlapping another component/body. This flag has no influence on single body components.

  • never_distance_cull (bool): [Read-Write] Never Distance Cull: When enabled this object will not be culled by distance. This is ignored if a child of a HLOD.

  • on_begin_cursor_over (ComponentBeginCursorOverSignature): [Read-Write] On Begin Cursor Over: Event called when the mouse cursor is moved over this component and mouse over events are enabled in the player controller

  • on_clicked (ComponentOnClickedSignature): [Read-Write] On Clicked: Event called when the left mouse button is clicked while the mouse is over this component and click events are enabled in the player controller

  • on_component_activated (ActorComponentActivatedSignature): [Read-Write] On Component Activated: Called when the component has been activated, with parameter indicating if it was from a reset

  • on_component_begin_overlap (ComponentBeginOverlapSignature): [Read-Write] On Component Begin Overlap: Event called when something starts to overlaps this component, for example a player walking into a trigger. For events when objects have a blocking collision, for example a player hitting a wall, see ‘Hit’ events. note: Both this component and the other one must have GetGenerateOverlapEvents() set to true to generate overlap events. note: When receiving an overlap from another object’s movement, the directions of ‘Hit.Normal’ and ‘Hit.ImpactNormal’ will be adjusted to indicate force from the other object against this object.

  • on_component_deactivated (ActorComponentDeactivateSignature): [Read-Write] On Component Deactivated: Called when the component has been deactivated

  • on_component_end_overlap (ComponentEndOverlapSignature): [Read-Write] On Component End Overlap: Event called when something stops overlapping this component note: Both this component and the other one must have GetGenerateOverlapEvents() set to true to generate overlap events.

  • on_component_hit (ComponentHitSignature): [Read-Write] On Component Hit: Event called when a component hits (or is hit by) something solid. This could happen due to things like Character movement, using Set Location with ‘sweep’ enabled, or physics simulation. For events when objects overlap (e.g. walking into a trigger) see the ‘Overlap’ event. note: For collisions during physics simulation to generate hit events, ‘Simulation Generates Hit Events’ must be enabled for this component. note: When receiving a hit from another object’s movement, the directions of ‘Hit.Normal’ and ‘Hit.ImpactNormal’ will be adjusted to indicate force from the other object against this object. note: NormalImpulse will be filled in for physics-simulating bodies, but will be zero for swept-component blocking collisions.

  • on_component_sleep (ComponentSleepSignature): [Read-Write] On Component Sleep: Event called when the underlying physics objects is put to sleep

  • on_component_wake (ComponentWakeSignature): [Read-Write] On Component Wake: Event called when the underlying physics objects is woken up

  • on_end_cursor_over (ComponentEndCursorOverSignature): [Read-Write] On End Cursor Over: Event called when the mouse cursor is moved off this component and mouse over events are enabled in the player controller

  • on_input_touch_begin (ComponentOnInputTouchBeginSignature): [Read-Write] On Input Touch Begin: Event called when a touch input is received over this component when touch events are enabled in the player controller

  • on_input_touch_end (ComponentOnInputTouchEndSignature): [Read-Write] On Input Touch End: Event called when a touch input is released over this component when touch events are enabled in the player controller

  • on_input_touch_enter (ComponentBeginTouchOverSignature): [Read-Write] On Input Touch Enter: Event called when a finger is moved over this component when touch over events are enabled in the player controller

  • on_input_touch_leave (ComponentEndTouchOverSignature): [Read-Write] On Input Touch Leave: Event called when a finger is moved off this component when touch over events are enabled in the player controller

  • on_released (ComponentOnReleasedSignature): [Read-Write] On Released: Event called when the left mouse button is released while the mouse is over this component click events are enabled in the player controller

  • only_owner_see (bool): [Read-Write] Only Owner See: If this is True, this component will only be visible when the view actor is the component’s owner, directly or indirectly.

  • override_materials (Array(MaterialInterface)): [Read-Write] Override Materials: Material overrides.

  • override_min_lod (bool): [Read-Write] Override Min Lod: Whether we should use the min lod specified in MinLodModel for this component instead of the min lod in the mesh

  • owner_no_see (bool): [Read-Write] Owner No See: If this is True, this component won’t be visible when the view actor is the component’s owner, directly or indirectly.

  • per_bone_motion_blur (bool): [Read-Write] Per Bone Motion Blur: If true, use per-bone motion blur on this skeletal mesh (requires additional rendering, can be disabled to save performance).

  • physics_asset_override (PhysicsAsset): [Read-Write] Physics Asset Override: PhysicsAsset is set in SkeletalMesh by default, but you can override with this value

  • physics_volume_changed_delegate (PhysicsVolumeChanged): [Read-Write] Physics Volume Changed Delegate: Delegate that will be called when PhysicsVolume has been changed *

  • primary_component_tick (ActorComponentTickFunction): [Read-Write] Primary Component Tick: Main tick function for the Component

  • ray_tracing_group_culling_priority (RayTracingGroupCullingPriority): [Read-Write] Ray Tracing Group Culling Priority: Defines how quickly it should be culled. For example buildings should have a low priority, but small dressing should have a high priority.

  • ray_tracing_group_id (int32): [Read-Write] Ray Tracing Group Id: Defines run-time groups of components. For example allows to assemble multiple parts of a building at runtime. -1 means that component doesn’t belong to any group.

  • receive_mobile_csm_shadows (bool): [Read-Write] Receive Mobile CSMShadows: Mobile only: If disabled this component will not receive CSM shadows. (Components that do not receive CSM may have reduced shading cost)

  • receives_decals (bool): [Read-Write] Receives Decals: Whether the primitive receives decals.

  • relative_location (Vector): [Read-Write] Relative Location: Location of the component relative to its parent

  • relative_rotation (Rotator): [Read-Write] Relative Rotation: Rotation of the component relative to its parent

  • relative_scale3d (Vector): [Read-Write] Relative Scale 3D: Non-uniform scaling of the component relative to its parent. Note that scaling is always applied in local space (no shearing etc)

  • render_custom_depth (bool): [Read-Write] Render Custom Depth: If true, this component will be rendered in the CustomDepth pass (usually used for outlines)

  • render_in_depth_pass (bool): [Read-Write] Render in Depth Pass: If true, this component will be rendered in the depth pass even if it’s not rendered in the main pass

  • render_in_main_pass (bool): [Read-Write] Render in Main Pass: If true, this component will be rendered in the main pass (z prepass, basepass, transparency)

  • render_static (bool): [Read-Write] Render Static: If true, render as static in reference pose.

  • replicate_physics_to_autonomous_proxy (bool): [Read-Write] Replicate Physics to Autonomous Proxy: True if physics should be replicated to autonomous proxies. This should be true for

    server-authoritative simulations, and false for client authoritative simulations.

  • replicates (bool): [Read-Write] Replicates: Is this component currently replicating? Should the network code consider it for replication? Owning Actor must be replicating first!

  • return_material_on_move (bool): [Read-Write] Return Material on Move: If true, component sweeps will return the material in their hit result. see: MoveComponent(), FHitResult

  • runtime_virtual_textures (Array(RuntimeVirtualTexture)): [Read-Write] Runtime Virtual Textures: Array of runtime virtual textures into which we draw the mesh for this actor. The material also needs to be set up to output to a virtual texture.

  • self_shadow_only (bool): [Read-Write] Self Shadow Only: When enabled, the component will only cast a shadow on itself and not other components in the world. This is especially useful for first person weapons, and forces bCastInsetShadow to be enabled.

  • should_update_physics_volume (bool): [Read-Write] Should Update Physics Volume: Whether or not the cached PhysicsVolume this component overlaps should be updated when the component is moved. see: GetPhysicsVolume()

  • single_sample_shadow_from_stationary_lights (bool): [Read-Write] Single Sample Shadow from Stationary Lights: Whether the whole component should be shadowed as one from stationary lights, which makes shadow receiving much cheaper. When enabled shadowing data comes from the volume lighting samples precomputed by Lightmass, which are very sparse. This is currently only used on stationary directional lights.

  • skeletal_mesh (SkeletalMesh): [Read-Write] Skeletal Mesh: The skeletal mesh used by this component.

  • skin_cache_usage (Array(SkinCacheUsage)): [Read-Write] Skin Cache Usage: How this Component’s LOD uses the skin cache feature. Auto will defer to the asset’s (SkeletalMesh) option. If Ray Tracing is enabled, will imply Enabled

  • streaming_distance_multiplier (float): [Read-Write] Streaming Distance Multiplier: Allows adjusting the desired streaming distance of streaming textures that uses UV 0. 1.0 is the default, whereas a higher value makes the textures stream in sooner from far away. A lower value (0.0-1.0) makes the textures stream in later (you have to be closer). Value can be < 0 (from legcay content, or code changes)

  • sync_attach_parent_lod (bool): [Read-Write] Sync Attach Parent LOD: If true, this component uses its parents LOD when attached if available ForcedLOD can override this change. By default, it will use parent LOD.

  • trace_complex_on_move (bool): [Read-Write] Trace Complex on Move: If true, component sweeps with this component should trace against complex collision during movement (for example, each triangle of a mesh). If false, collision will be resolved against simple collision bounds instead. see: MoveComponent()

  • translucency_sort_distance_offset (float): [Read-Write] Translucency Sort Distance Offset: Modified sort distance offset for translucent objects in world units. A positive number will move the sort distance further and a negative number will move the distance closer.

    Ignored if the object is not translucent. Warning: Adjusting this value will prevent the renderer from correctly sorting based on distance. Only modify this value if you are certain it will not cause visual artifacts.

  • translucency_sort_priority (int32): [Read-Write] Translucency Sort Priority: Translucent objects with a lower sort priority draw behind objects with a higher priority. Translucent objects with the same priority are rendered from back-to-front based on their bounds origin. This setting is also used to sort objects being drawn into a runtime virtual texture.

    Ignored if the object is not translucent. The default priority is zero. Warning: This should never be set to a non-default value unless you know what you are doing, as it will prevent the renderer from sorting correctly. It is especially problematic on dynamic gameplay effects.

  • treat_as_background_for_occlusion (bool): [Read-Write] Treat as Background for Occlusion: Treat this primitive as part of the background for occlusion purposes. This can be used as an optimization to reduce the cost of rendering skyboxes, large ground planes that are part of the vista, etc.

  • use_as_occluder (bool): [Read-Write] Use as Occluder: Whether to render the primitive in the depth only pass. This should generally be true for all objects, and let the renderer make decisions about whether to render objects in the depth only pass. todo: if any rendering features rely on a complete depth only pass, this variable needs to go away.

  • use_attach_parent_bound (bool): [Read-Write] Use Attach Parent Bound: If true, this component uses its parents bounds when attached. This can be a significant optimization with many components attached together.

  • use_bounds_from_master_pose_component (bool): [Read-Write] Use Bounds from Master Pose Component: When true, we will just using the bounds from our MasterPoseComponent. This is useful for when we have a Mesh Parented to the main SkelMesh (e.g. outline mesh or a full body overdraw effect that is toggled) that is always going to be the same bounds as parent. We want to do no calculations in that case.

  • virtual_texture_cull_mips (int8): [Read-Write] Virtual Texture Cull Mips: Number of lower mips in the runtime virtual texture to skip for rendering this primitive. Larger values reduce the effective draw distance in the runtime virtual texture. This culling method doesn’t take into account primitive size or virtual texture size.

  • virtual_texture_lod_bias (int8): [Read-Write] Virtual Texture Lod Bias: Bias to the LOD selected for rendering to runtime virtual textures.

  • virtual_texture_min_coverage (int8): [Read-Write] Virtual Texture Min Coverage: Set the minimum pixel coverage before culling from the runtime virtual texture. Larger values reduce the effective draw distance in the runtime virtual texture.

  • virtual_texture_render_pass_type (RuntimeVirtualTextureMainPassType): [Read-Write] Virtual Texture Render Pass Type: Controls if this component draws in the main pass as well as in the virtual texture.

  • visibility_based_anim_tick_option (VisibilityBasedAnimTickOption): [Read-Write] Visibility Based Anim Tick Option: * This is tick animation frequency option based on this component rendered or not or using montage * You can change this default value in the INI file * Mostly related with performance

  • visible (bool): [Read-Write] Visible: Whether to completely draw the primitive; if false, the primitive is not drawn, does not cast a shadow.

  • visible_in_ray_tracing (bool): [Read-Write] Visible in Ray Tracing: If true, this component will be visible in ray tracing effects. Turning this off will remove it from ray traced reflections, shadows, etc.

  • visible_in_real_time_sky_captures (bool): [Read-Write] Visible in Real Time Sky Captures: If true, this component will be visible in real-time sky light reflection captures.

  • visible_in_reflection_captures (bool): [Read-Write] Visible in Reflection Captures: If true, this component will be visible in reflection captures.

  • visible_in_scene_capture_only (bool): [Read-Write] Visible in Scene Capture Only: When true, will only be visible in Scene Capture

bone_is_child_of(bone_name, parent_bone_name) bool

Tests if BoneName is child of (or equal to) ParentBoneName.

Parameters
  • bone_name (Name) – Name of the bone

  • parent_bone_name (Name) –

Returns

true if child (strictly, not same). false otherwise Note - will return false if ChildBoneIndex is the same as ParentBoneIndex ie. must be strictly a child.

Return type

bool

property capsule_indirect_shadow_min_visibility

[Read-Only] Capsule Indirect Shadow Min Visibility: Controls how dark the capsule indirect shadow can be.

Type

(float)

property cast_capsule_direct_shadow

[Read-Only] Cast Capsule Direct Shadow: Whether to use the capsule representation (when present) from a skeletal mesh’s ShadowPhysicsAsset for direct shadowing from lights. This type of shadowing is approximate but handles extremely wide area shadowing well. The softness of the shadow depends on the light’s LightSourceAngle / SourceRadius. This flag will force bCastInsetShadow to be enabled.

Type

(bool)

property cast_capsule_indirect_shadow

[Read-Only] Cast Capsule Indirect Shadow: Whether to use the capsule representation (when present) from a skeletal mesh’s ShadowPhysicsAsset for shadowing indirect lighting (from lightmaps or skylight).

Type

(bool)

clear_skin_weight_override(lod_index) None

Clear any applied skin weight override

Parameters

lod_index (int32) –

clear_skin_weight_profile() None

Clear the Skin Weight Profile from this component, in case it is set

clear_vertex_color_override(lod_index) None

Clear any applied vertex color override

Parameters

lod_index (int32) –

property component_use_fixed_skel_bounds

[Read-Write] Component Use Fixed Skel Bounds: When true, skip using the physics asset etc. and always use the fixed bounds defined in the SkeletalMesh.

Type

(bool)

property consider_all_bodies_for_bounds

[Read-Write] Consider All Bodies for Bounds: If true, when updating bounds from a PhysicsAsset, consider _all_ BodySetups, not just those flagged with bConsiderForBounds.

Type

(bool)

property disable_morph_target

[Read-Write] Disable Morph Target: Disable Morphtarget for this component.

Type

(bool)

property display_debug_update_rate_optimizations

[Read-Write] Display Debug Update Rate Optimizations: Enable on screen debugging of update rate optimization. Red = Skipping 0 frames, Green = skipping 1 frame, Blue = skipping 2 frames, black = skipping more than 2 frames. todo:: turn this into a console command.

Type

(bool)

property enable_update_rate_optimizations

[Read-Write] Enable Update Rate Optimizations: if TRUE, Owner will determine how often animation will be updated and evaluated. See AnimUpdateRateTick() This allows to skip frames for performance. (For example based on visibility and size on screen).

Type

(bool)

find_closest_bone_k2(test_location, ignore_scale=0.000000, require_physics_asset=False) -> (Name, bone_location=Vector)

finds the closest bone to the given location

Parameters
  • test_location (Vector) – the location to test against

  • ignore_scale (float) – (optional) if specified, only bones with scaling larger than the specified factor are considered

  • require_physics_asset (bool) – (optional) if true, only bones with physics will be considered

Returns

the name of the bone that was found, or ‘None’ if no bone was found

bone_location (Vector): (optional, out) if specified, set to the world space location of the bone that was found, or (0,0,0) if no bone was found

Return type

Vector

property forced_lod_model

[Read-Only] Forced Lod Model

Type

(int32)

get_bone_index(bone_name) int32

Find the index of bone by name. Looks in the current SkeletalMesh being used by this SkeletalMeshComponent. see: USkeletalMesh::GetBoneIndex.

Parameters

bone_name (Name) – Name of bone to look up

Returns

Index of the named bone in the current SkeletalMesh. Will return INDEX_NONE if bone not found.

Return type

int32

get_bone_name(bone_index) Name

Get Bone Name from index

Parameters

bone_index (int32) – Index of the bone

Returns

the name of the bone at the specified index

Return type

Name

get_current_skin_weight_profile_name() Name

Return the name of the Skin Weight Profile that is currently set otherwise returns ‘None’

Return type

Name

get_delta_transform_from_ref_pose(bone_name, base_name='None') Transform

Get delta transform from reference pose based on BaseNode. This uses last frame up-to-date transform, so it will have a frame delay if you use this info in the AnimGraph

Parameters
  • bone_name (Name) – Name of the bone

  • base_name (Name) – Name of the base bone - if none, it will use parent as a base

Returns

the delta transform from refpose in that given space (BaseName)

Return type

Transform

get_forced_lod() int32

Get ForcedLodModel of the mesh component. Note that the actual forced LOD level is the return value minus one and zero means no forced LOD

Return type

int32

get_num_bones() int32

Returns the number of bones in the skeleton.

Return type

int32

get_num_lo_ds() int32

Get the number of LODs on this component

Return type

int32

get_parent_bone(bone_name) Name

Get Parent Bone of the input bone

Parameters

bone_name (Name) – Name of the bone

Returns

the name of the parent bone for the specified bone. Returns ‘None’ if the bone does not exist or it is the root bone

Return type

Name

get_ref_pose_position(bone_index) Vector

Gets the local-space position of a bone in the reference pose.

Parameters

bone_index (int32) – Index of the bone

Returns

Local space reference position

Return type

Vector

get_ref_pose_transform(bone_index) Transform

Gets the local-space transform of a bone in the reference pose.

Parameters

bone_index (int32) – Index of the bone

Returns

Local space reference transform

Return type

Transform

get_socket_bone_name(socket_name) Name

Returns bone name linked to a given named socket on the skeletal mesh component. If you’re unsure to deal with sockets or bones names, you can use this function to filter through, and always return the bone name.

Parameters

socket_name (Name) –

Returns

bone name

Return type

Name

get_twist_and_swing_angle_of_delta_rotation_from_ref_pose(bone_name) (out_twist_angle=float, out_swing_angle=float) or None

Get Twist and Swing Angle in Degree of Delta Rotation from Reference Pose in Local space

First this function gets rotation of current, and rotation of ref pose in local space, and And gets twist/swing angle value from refpose aligned.

Parameters

bone_name (Name) – Name of the bone

Returns

true if succeed. False otherwise. Often due to incorrect bone name.

out_twist_angle (float): TwistAngle in degree

out_swing_angle (float): SwingAngle in degree

Return type

tuple or None

get_vertex_offset_usage(lod_index) int32

Get Vertex Offset Usage

Parameters

lod_index (int32) –

Return type

int32

hide_bone_by_name(bone_name, phys_body_option) None

Hides the specified bone with name. Currently this just enforces a scale of 0 for the hidden bones. Compared to HideBone By Index - This keeps track of list of bones and update when LOD changes

Parameters
  • bone_name (Name) – Name of bone to hide

  • phys_body_option (PhysBodyOp) – Option for physics bodies that attach to the bones to be hidden

property ignore_master_pose_component_lod

[Read-Only] Ignore Master Pose Component LOD: Flag that when set will ensure UpdateLODStatus will not take the MasterPoseComponent’s current LOD in consideration when determining the correct LOD level (this requires MasterPoseComponent’s LOD to always be >= determined LOD otherwise bone transforms could be missing

Type

(bool)

is_bone_hidden_by_name(bone_name) bool

Determines if the specified bone is hidden.

Parameters

bone_name (Name) – Name of bone to check

Returns

true if hidden

Return type

bool

is_material_section_shown(material_id, lod_index) bool

Returns whether a specific material section is currently hidden on this component (by using ShowMaterialSection)

Parameters
  • material_id (int32) –

  • lod_index (int32) –

Return type

bool

is_using_skin_weight_profile() bool

Check whether or not a Skin Weight Profile is currently set

Return type

bool

property master_pose_component

[Read-Only] Master Pose Component: If set, this SkeletalMeshComponent will not use its SpaceBase for bone transform, but will use the component space transforms from the MasterPoseComponent. This is used when constructing a character using multiple skeletal meshes sharing the same skeleton within the same Actor.

Type

(SkinnedMeshComponent)

match_ref_bone(bone_name)

deprecated: ‘match_ref_bone’ was renamed to ‘get_bone_index’.

property mesh_component_update_flag

‘mesh_component_update_flag’ was renamed to ‘visibility_based_anim_tick_option’.

Type

deprecated

property mesh_deformer

[Read-Only] Mesh Deformer: If set then the MeshDeformer will be used instead of the fixed animation pipeline.

Type

(MeshDeformer)

property min_lod_model

[Read-Only] Min Lod Model: This is the min LOD that this component will use. (e.g. if set to 2 then only 2+ LOD Models will be used.) This is useful to set on meshes which are known to be a certain distance away and still want to have better LODs when zoomed in on them.

Type

(int32)

property override_min_lod

[Read-Only] Override Min Lod: Whether we should use the min lod specified in MinLodModel for this component instead of the min lod in the mesh

Type

(bool)

property per_bone_motion_blur

[Read-Only] Per Bone Motion Blur: If true, use per-bone motion blur on this skeletal mesh (requires additional rendering, can be disabled to save performance).

Type

(bool)

property physics_asset_override

[Read-Only] Physics Asset Override: PhysicsAsset is set in SkeletalMesh by default, but you can override with this value

Type

(PhysicsAsset)

property render_static

[Read-Only] Render Static: If true, render as static in reference pose.

Type

(bool)

set_capsule_indirect_shadow_min_visibility(new_value) None

Set Capsule Indirect Shadow Min Visibility

Parameters

new_value (float) –

set_cast_capsule_direct_shadow(new_value) None

Set Cast Capsule Direct Shadow

Parameters

new_value (bool) –

set_cast_capsule_indirect_shadow(new_value) None

Set Cast Capsule Indirect Shadow

Parameters

new_value (bool) –

set_forced_lod(new_forced_lod) None

Set ForcedLodModel of the mesh component

Parameters

new_forced_lod (int32) – Set new ForcedLODModel that forces to set the incoming LOD. Range from [1, Max Number of LOD]. This will affect in the next tick update.

set_master_pose_component(new_master_bone_component, force_update=False) None

Set MasterPoseComponent for this component

Parameters
set_mesh_deformer(mesh_deformer) None

Change the MeshDeformer that is used for this Component.

Parameters

mesh_deformer (MeshDeformer) – New mesh deformer to set for this component

set_min_lod(new_min_lod) None

Set MinLodModel of the mesh component

Parameters

new_min_lod (int32) – Set new MinLodModel that make sure the LOD does not go below of this value. Range from [0, Max Number of LOD - 1]. This will affect in the next tick update.

set_physics_asset(new_physics_asset, force_re_init=False) None

Override the Physics Asset of the mesh. It uses SkeletalMesh.PhysicsAsset, but if you’d like to override use this function

Parameters
  • new_physics_asset (PhysicsAsset) – New PhysicsAsset

  • force_re_init (bool) – Force reinitialize

set_post_skinning_offsets(lod_index, offsets) None

Set Post Skinning Offsets

Parameters
set_pre_skinning_offsets(lod_index, offsets) None

Set Pre Skinning Offsets

Parameters
set_render_static(new_value) None

Set whether this skinned mesh should be rendered as static mesh in a reference pose

Parameters

new_value (bool) –

set_skeletal_mesh(new_mesh, reinit_pose=True) None

Change the SkeletalMesh that is rendered for this Component. Will re-initialize the animation tree etc.

Parameters
  • new_mesh (SkeletalMesh) – New mesh to set for this component

  • reinit_pose (bool) – Whether we should keep current pose or reinitialize.

set_skin_weight_override(lod_index, skin_weights) None

Allow override of skin weights on a per-component basis.

Parameters
set_skin_weight_profile(profile_name) bool

Setup an override Skin Weight Profile for this component

Parameters

profile_name (Name) –

Return type

bool

set_vertex_color_override_linear_color(lod_index, vertex_colors) None

Allow override of vertex colors on a per-component basis, taking array of Blueprint-friendly LinearColors.

Parameters
set_vertex_offset_usage(lod_index, usage) None

Set Vertex Offset Usage

Parameters
  • lod_index (int32) –

  • usage (int32) –

show_all_material_sections(lod_index) None

Clear any material visibility modifications made by ShowMaterialSection

Parameters

lod_index (int32) –

show_material_section(material_id, section_index, show, lod_index) None

Allows hiding of a particular material (by ID) on this instance of a SkeletalMesh.

Parameters
  • material_id (int32) – Index of the material show/hide

  • section_index (int32) –

  • show (bool) – True to show the material, false to hide it

  • lod_index (int32) – Index of the LOD to modify material visibility within

property skeletal_mesh

[Read-Only] Skeletal Mesh: The skeletal mesh used by this component.

Type

(SkeletalMesh)

property skin_cache_usage

[Read-Only] Skin Cache Usage: How this Component’s LOD uses the skin cache feature. Auto will defer to the asset’s (SkeletalMesh) option. If Ray Tracing is enabled, will imply Enabled

Type

(Array(SkinCacheUsage))

property streaming_distance_multiplier

[Read-Write] Streaming Distance Multiplier: Allows adjusting the desired streaming distance of streaming textures that uses UV 0. 1.0 is the default, whereas a higher value makes the textures stream in sooner from far away. A lower value (0.0-1.0) makes the textures stream in later (you have to be closer). Value can be < 0 (from legcay content, or code changes)

Type

(float)

property sync_attach_parent_lod

[Read-Write] Sync Attach Parent LOD: If true, this component uses its parents LOD when attached if available ForcedLOD can override this change. By default, it will use parent LOD.

Type

(bool)

transform_from_bone_space(bone_name, position, rotation) -> (out_position=Vector, out_rotation=Rotator)

Transform a location/rotation in bone relative space to world space.

Parameters
  • bone_name (Name) – Name of bone

  • position (Vector) – Input position

  • rotation (Rotator) – Input rotation

Returns

out_position (Vector): (out) Transformed position

out_rotation (Rotator): (out) Transformed rotation

Return type

tuple

transform_to_bone_space(bone_name, position, rotation) -> (out_position=Vector, out_rotation=Rotator)

Transform a location/rotation from world space to bone relative space. This is handy if you know the location in world space for a bone attachment, as AttachComponent takes location/rotation in bone-relative space.

Parameters
  • bone_name (Name) – Name of bone

  • position (Vector) – Input position

  • rotation (Rotator) – Input rotation

Returns

out_position (Vector): (out) Transformed position

out_rotation (Rotator): (out) Transformed rotation

Return type

tuple

un_hide_bone_by_name(bone_name) None

UnHide the specified bone with name. Currently this just enforces a scale of 0 for the hidden bones. Compared to HideBone By Index - This keeps track of list of bones and update when LOD changes

Parameters

bone_name (Name) – Name of bone to unhide

unload_skin_weight_profile(profile_name) None

Unload a Skin Weight Profile’s skin weight buffer (if created)

Parameters

profile_name (Name) –

property use_bounds_from_master_pose_component

[Read-Write] Use Bounds from Master Pose Component: When true, we will just using the bounds from our MasterPoseComponent. This is useful for when we have a Mesh Parented to the main SkelMesh (e.g. outline mesh or a full body overdraw effect that is toggled) that is always going to be the same bounds as parent. We want to do no calculations in that case.

Type

(bool)

property visibility_based_anim_tick_option

[Read-Write] Visibility Based Anim Tick Option: * This is tick animation frequency option based on this component rendered or not or using montage * You can change this default value in the INI file * Mostly related with performance

Type

(VisibilityBasedAnimTickOption)